Примеры использования Current transformer на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Switching on the appliance power meter in successive chains of I1604- via current transformers with secondary winding to 5A or 1A and a current transformer with a secondary winding on 5A.
Through current transformer primary current equal to the final value of the measuring range,
TNShL-0,66 current transformer is designed to transmit a signal measuring instrument measurement information,
c. Magnetic saturation in the iron core increases the current transformer error.
Through the current transformer primary current equal to the final value of the measuring range, and the secondary current of 5 A and a current transformer 5 with a length more than 25m Trunk.
kiloampermetr EA2258M with the scale for use with 400A current transformer with a rated primary current 400 A
measuring the incorporation of a current transformer strength of the secondary current 5A
to increase the limit of measurement, it may be equipped with a shunt(for DC and AC), a current transformer(only for AC circuits)
The phenomenon of overheating, smoke emission, and fluidity in the current transformer may be caused by poor connection of the primary side wiring,
without external current transformers.
a block of drive and current transformers.
Possibility to install up to three current transformers.
New excitation curve measurement to test current transformers in accordance with the IEC 61869 standard.
System: Current Transformers for the stadium electrical panel boards.
Accounting devices(counters, current transformers) are placed in the upper part of the enclosure.
transformers industrial>> current transformers>> 10kV voltage class.
We also offer solutions for testing bushing-type current transformers for measurement deviations
Integration of new composite error test on C-class protection current transformers with assessment according to IEEE C57.13.
During this period, in 11 regions of the company's service area 2,416 oil circuit breakers of 6-110 kV and 201 current transformers were replaced.
When testing transducers, current transformers and clamps, a DC input with ranges 10V/20mA and an AC input