Примери за използване на Exhaust air на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Full-area systems- Exhaust air is extracted across the entire area through open
An optimum extraction function across the entire area of the facility to guarantee 100% capture and extraction of exhaust air.
Current models of vacuum cleaners have several degrees of exhaust air cleaning and dust and contaminants are delayed by 90%,
The volume of the box depends on the norms for removing the volume of exhaust air from the room.
They reduce the costs of heating ventilated air in the winter by transferring heat from the warm inside exhaust air to the fresh(but cold)
Supply and exhaust air unit with heat recovery allows you to return to the room exhaust air heat.
that is organized and the inflow and exhaust air.
For example, in the form of explosion protection according to ATEX 94/9 or wastewater and exhaust air treatment systems compliant with the Federal Control of Pollution Act.
Hot and cold air is contained in separate aisles to reduce the mixing of cooled air and hot exhaust air in data center aisles.
and disposal of exhaust air.
Exhaust air is above the roof of the building(without delivery
Exhaust air is above the roof of the building(without delivery
O Designed for fresh air inlet and exhaust air discharge in the ventilation and air-conditioning installations.
post-heat recovery fresh air reheating and exhaust air filtration with efficiency up to 94%.
as well as exhaust air and wastewater treatment measures.
Ambient and exhaust air, soil and ground water are practical heat sources for small heat pump systems,
Highly efficient heat recovery from exhaust air using an air-to-air heat exchanger: Most of the perceptible heat in the exhaust air is transferred to the incoming fresh air(heat recovery rate over 80%).
integrating such factors as heat-recovery from exhaust air, lighting, and water-collection for grey water flushing
controlled ventilation of rooms with energy recovery from exhaust air.
Exhaust air temperature is the main factor affecting the moisture content of finished products,