Примери за използване на Radius of curvature на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
the dimensions and radius of curvature of the mirror's reflecting surface;
In this case, the radius of curvature should be more than half the width of the opening.
area, radius of curvature, and the angles and shapes.
What to do if the lens has already been purchased, andthe radius of curvature of the lens you do not like?
The first thing that needs to be done is to roughly grind out the front of the mirror until the desires radius of curvature of the spherical surface is achieved.
This point shall be selected on the longest median in the part of the pane where the radius of curvature is the smallest.
Brick ceilings can be arranged with different boom lift and radius of curvature, but as a rule remain rectangular or rounded.
This point is selected on the largest median in that part of the pane where the radius of curvature is smallest.
Friedmann showed that the radius of curvature of the universe can be either an increasing
Procedure for determining the radius of curvature"r" of the reflecting surface of a mirror 65.
the ray of parallel incident radiates outwards, the radius of curvature of two sides of the double concave lens is equal,
smooth transition, and the radius of curvature is better,
9 mm radius of curvature) marked with the BAYER-cross on one side and“20”
a smooth transition, and the radius of curvature is a little better,
9 mm radius of curvature) marked with the BAYER-cross on one side and“15”
1840s he conducted several experiments to see if the limitation on gradients and radius of curvature proposed by Stephenson was correct.
AVE/ Cyl is the average of the results of the basic curvature or the radius of curvature of the cornea(in mm)
the tooth surface contact points have a relatively large radius of curvature;
length depend on the radius of curvature) and to cut each element,
must have a radius of curvature'c' of not less than 2,5 mm.