Примери за използване на Reactive power на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The formula for reactive power is Q= VI sin ϕ,
Reactive power is used for voltage control in many industrial environments to overcome fluctuations in voltage levels.
commissioning of electrical equipment for compensation of reactive power of the heavy industrial mining equipment at Mini Maritsa-Iztok- Troyanovo-1 and Troyanovo-3 Mines.
The power in an inductive circuit is known as Reactive Power or volt-amps reactive,
Active power is the real power whereas reactive power is used for transmission of real power. .
Kaolin" AD Design, installation and commissioning of the system for compensation of reactive power 6kV.
Active power and reactive power are the two most common terms used to describe the energy flow in electrical power systems.
active power, reactive power, apparent power,
Voltage and reactive power control pursuant to Article 24 of Regulation(EU) 2016/1447, and.
real power,(P) and the reactive power,(Q) as shown.
Configures the required amount of reactive current in real-time and compensates the reactive power to filter high order harmonics.
which only corrects inductive loads, PQSine also compensates capacitive reactive power loads.
They are used in three-wire three-phase AC networks to measure active and reactive power.
including active and reactive power, while supplying such energy;'.
lagging reactive current in real-time to improve the power factor and compensate reactive power.
because there is not enough emphasis on reactive power compensation, power increased considerably.
or megawatts(MW) whereas reactive power is measured in volt-ampere reactive(var).
Active power is in-phase with the load whereas reactive power is out of phase with the load.
This is achieved by accumulating reactive power in specially designed capacitors