Примери за използване на The bolts на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
About one month after assembling your EGG, check whether all the bolts and nuts/nut caps you placed during the assembly are still tight.
In conclusion, make sure that all the bolts are securely tightened,
This is done with controlled tightening of the bolts with a torque wrench in two consecutive steps.
In order for you to make your way home you must find all the bolts that belong to your ship which are scattered around the various levels.
cross member and loosen all the bolts with which the tire is tightened.
inside which the protecting plates are fastened with the bolts.
you can control it with the mouse or with the bolts.
We hug, feeling our naked torsos against each other, the bolts extra in me now,
All the resulting holes after removing the bolts are closed with the plugs supplied in the kit.
When tightening the bolts, there should be sufficient pre-tightening force, and the pre-tightening force should be 70% of the bolt data's compliance limit.
Hexagons are used to loosen and tighten the bolts during the repair and assembly of furniture.
doing up the bolts, that's Mazda's job.
Guards and safety devices must have an installed base to secure the bolts to their equipment and the supporting structure;
Such adjustment of the drill of the screwdriver allows screwing the screws or tightening the bolts with the same force.
Contains 14x15 mm sockets and 8 mm allen key for removing the bolts from the crank arm and shoulder.
it should check whether the bolts are loose
In order for you to make your way home you must find all the bolts that belong to your ship which are scattered around the various levels.
freely rotated to perfectly fit the bolts under the holes, and replacing equipment.
Metal Sputtering Targets so repeat until after installing all the bolts, and then tighten the tool The. .
So what's happened for me is that the K-Seal has stopped the leak from the cylinder head due to lost torque of the bolts, so i thought sweet, no more cylinder head coolant weepage,