Примери за използване на The insulator на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
If the insulator tip is clogged with carbon deposits,
The insulator foot has notable features like advanced electric performance,
If the tip temperature is lower than 500°C, the insulator area surrounding the center electrode will not be hot enough to burn off carbon and combustion chamber deposits.
withstanding short-circuit strength test of 120A/mm2, the insulator foot made of.
You can use the sealant(to squeeze a small amount of sealant to one of the insulator halves and close the two halves of the terminal).
Since the resistance to the side electrodes is smaller than the resistance of the insulator, the voltage jumps over to the side electrodes,
which led to the polarization(or charge) of the insulator, and created in the surrounding quasi-constant electric field.
on the other- there is a high probability that the line will stretch under the weight of the insulator with time.
Bearing in mind that the insulator nose length is a determining factor in the heat range of a spark plug,
Simply disconnected from the insulators.
While inheriting the technology of the SL-1200G, the insulators have had tuning performed specifically for the SL-1200GR.
V-shaped fixing of cable terminals to the fiberglass rod provide for unsurpassed mechanical strength of the insulators even in the unavoidable cases of prolonged electric arch in real circumstances(due to atmospheric
Only in 2013 we changed the fate of 232 children by not allowing them to go in the insulators of the homes for medical and social care for children- homes for abandoned babies!
it can be observed that the electrons are able to pass through the insulators as a result of the damage.
strength of the wire, the fittings, the insulators and the tower, so that the wire can be pulled out from the pressure nozzle, or the outer aluminum shares are completely broken, and the steel core
The insulator nose length is the distance from the tip of the insulator to the point where insulator meets the metal shell.
copper foil tape is mainly used for difficult to fix the insulation of the insulator, less use within the scope of aviation.