英語 での Peel strength の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
With great tack and holding power, high peel strength, great heat-resistance performance, excellent resistance to oil-bleeding and ageing.
DIC provides products that achieve both peel strength and texture, along with permeability to the base material.
Small aged deterioration of peel strength after sealing. High stronger reliability at high temp and humidity.
Adhesive tape peel strength test Adhesive tape is pulled by a force gauge to test its peel(bonding) strength. .
Hygienic side tape applications, or other pressure sensitive applications that high holding power, peel strength.
Such as shear strength test machine, peel strength test machine, Endurance testing machine, colour fastness test machine. etc.
Adhesive tape peel strength test- IMADA CO., LTD. This is the 180 degree peel test of adhesive tape.
The results showed that the addition of EBP to LDPE exerted significant effects on the mechanical properties such as the tensile strength and peel strength.
Adhesion was measured using a 180° peel strength test on tape applied to a stainless steel.
Other pressure sensitive applications that high peel strength and tack, and moderate.
Permanent labels, and other pressure sensitive applications that high peel strength and tack are required.
Peel strength was measured at a peel rate of 12.5 mm/min.
High quality peel strength testing machine: 1. max load 100kg 2. 1 year warranty free.
The peel strength of a T-shaped bond of two flexible substances can be determined in following ISO 11339 method for self-adhesive tape.
Common results are the average, minimum and maximum peel force and peel strength values.
Taken different samples randomly from jumbo roll to test the tensile strength and peel strength, in order to test if the material is….
We test the peel strength with FR-4(Tg140) prepreg, please reconfirm with your pp.
Taken different samples randomly from jumbo roll to test the tensile strength and peel strength, in order to test if the material is qualified.
The addition of 10-25w% EBP in LDPE was sufficient to enhance the peel strength significantly.
Our hot melt adhesives have a wide range of heat-seal temperatures, which are used to adjust the peel strength.