英語 での Yield strength の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
The yield strength is uniform and there is no obvious directionality.
降伏強度は均一であり、明確な方向性はない。CNC PIN: Standard Yield Strength.
CNCPIN:標準的な降伏強さ。Wire, mm Yield strength.
ワイヤー、mm降伏強さ。Raw material Galvanized coils yield strength≤G250MPa.
原料電流を通されたコイルの収穫strength≤G250MPa。Average thickness of the galvanization: minimum yield strength is 86um.
亜鉛めっきの平均厚さ:最低の降伏強さは86umです。(kgs/mm) Yield strength.
(KGS/mmの)産出強。Titanium shows a high ultimate performance(tensile strength/yield strength), that means titanium products not easy to deform after forming.
チタンは、高い最終性能（引張強度/降伏強度）を示し、これは、成形後に変形しにくいチタン製品を意味する。Tensile strength σb(MPa) yield strength σ(MPa) elongation δ5(%) Hardness heating temperature pouring temperature.
引張強さσb（MPa）降伏強度σ（MPa）伸びδ5（％）硬度加熱温度注湯温度。Stress-relaxation rate: After being held for 1,000 hours at 150°C with a stress load of 80% of 0.2% yield strength.
Tensile strength Mpa, min Yield strength Mpa, min Elongation in 2''% min.
引張強さMpa、分降伏強さMpa、分2"の延長min.%の。Their combination of low yield strength and high elongation permits successful forming of complex shapes.
低降伏強度と高い伸びの彼らの組み合わせは、複雑な形状の成形に成功許可します。High strengthApproximately twice as strong as SUS304 and SUS316(comparison in 0.2% yield strength), which allows for a slimmer and lightweight design.
高強度SUS304，SUS316のほぼ2倍（0.2％耐力比較）の強度を有する薄肉軽量設計が可能です。Ultimate Tensile Strength Yield Strength at 0.2% Offset Elongation% min. Hardness(HRC) max.
終局引張耐力降伏強度0.2%オフセット伸長%分.硬度(HRC)最大。Ultimate Tensile Yield Strength(0.2% OS) Elong. in 2 in.
最終的な抗張降伏強さ（0.2%OS）Elong。2inに。High Strength(HS) Nitronic 50 has a yield strength about three times that of 316 Stainless Steel.
高強度（HS）ニトロニック50は、316ステンレス鋼の約3倍の耐力を持ちます。Feature All the advantages of normal aluminium alloy, high tensile strength& yield strength.
特徴通常のアルミニウム合金のすべての利点、高い引張強度と降伏強度、。However, the specific stress(σaverage) of the inner winding shall not exceed 50% of the copper conductor yield strength.
但し、内部の巻上げの特定の圧力（σaverage）は銅のコンダクターの降伏強さの50%を超過しません。Higher yield strength than conventional steel(constant yield strength irrespective of sheet thickness).
従来鋼よりも降伏強度を向上(板厚に関わらず降伏強度一定)。Minimum threshold stress required is 80% of specified minimum yield strength.
必要な最低の境界圧力は指定最低の降伏強さの80%です。Material Ultimate Tensile Strength1000 psi(MPa) Yield Strength 0.5% Ext.
材料最終的な抗張Strength1000psi（MPa）降伏強さ0.5%Ext。
