英語 での The bolts の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
One day, by coincidence, Rolf Steinbock walked in just when the bolts had become loose again.
It is understood that the bolts worn/ oxidized/ route has been replaced with new.
Do not apply lubricants such as grease or oil to the bolts or nuts.
For example, paste the inscription from the bolts on the cardboard, paint it with acrylic paint.
This decoiler is passive type, which could load coil by expanding the bolts fix at coil inner diameter.
The bolts used for hinged holes should match the dimensions of holes and be used when subjected to transverse forces.
Operation When tightening the bolts so many as 10 pcs or more of M36 for Example Not recommended Best Not bad.
Representing villages such as Sasuke and Kakashi while listening to the guidance of the bolts Ninja By our technique.
The bolts of your gates will be iron and bronze, and your strength will equal your days.
The bolts and the various steel and light alloy components showed no signs of oxidisation at the end of the test.
Between the layers, just loosen the bolts and nuts and move the ABS-coated pipes and bolts. .
All the bolts are been tested by advanced testing equipment before delivery to customers.
If the difference between head diameter and shaft diameter is 1mm or less the bolts can not be aligned on the chute.
Wait a second! Squat down. Take a look at the bolts on that bench.”.
Conditions, leads supporting and clamping, the bolts and nuts on the active part and the. .
Supplied by the Nord-Lock Group, the bolts are 5.5 metres long, 24 cm in diameter and weigh over 2,000 kg.
Replace wear plates when they show signs of thinning. Earliest signs of thinning will be seen around the bolts.
Using the 5mm ratchet supplied with the machine, remove the bolts and washers(2 on either side) joining the Font End Pad to each rail.
Presumably this was due to the loosening of the bolts on the iron compound.
In fist grip type clips, the saddle pieces are hot dip galvanized and the bolts and nuts are electro-galvanized(zinc plated).