英語 での The rods の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Wooden rods about 60- 70 cm long. The diameter of the rods should be less than the diameter of the pipes.
The rods were also designed based on professional anglers' advices.
This thermal injury or photocoagulation destroys the rods and cones, creating a small blind area.
Moveable control rods are placed between the rods of nuclear fuel.
Note the Inconel resistors leaving the caps and entering the rods, where they are connected to the copper cables of the power supply.
The rods that we manufacture are used in various industries for commercial and residential purposes.
Second difficulty, pass the rods through the hole while holding someone with one hand. Mission impossible;
No matter what is the qualtity you need for each size, we can deliever the rods to you.
Accurate dimension of taper degree perfectly matches the rods.
We have wanted to make the rods with Japan materials to really enjoy fishing.
The rods which connect the forelimbs with the hind legs, as well as the forelimbs themselves, are metal parts while the head, hind legs, and tail are pre-cut wooden parts.
Moreover to achieve the rods with thick torque for the easy turn over of big flies and the punching power, I add a little touch of power to the middle section on the basis of TOKACHI progressive dry action.
Here it should be noted that the rods valves should not reach edges 20 cm, and, therefore, on the basis of the length of the plates, the length of each Rod will total 460 cm.
Furthermore, the rods and cones located in the retina of the human eye cannot detect the very short(below 360 nm.) ultraviolet wavelengths, and are in fact damaged by ultraviolet.
In cases where such measures do not bring the desired result and the animal continues to gnaw the cage from the inside, it is recommended to grease the rods and wooden parts with an onion.
When moving the table, lift the table off of its legs and place it down squarely on the legs, do not drag the table and do not lift by the rods.
Casing shoes and rod shoes are designed to drill in casings or rods in difficult over burden material to position the rods or casing in the drilling hole.
grease the rods with a little' lard.