英語 での The transceiver の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
The transceiver IC also integrates circuits for on-chip DC offset cancellation, I/Q error, and carrier-leakage detection circuits.
The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the APD.
Status monitoring of the transceiver(transmission and reception status, internal temperature, and the settings for each mode).
The transceiver designs are optimized for high per-formance and cost effective to supply customers the best solutions for data-com and telecom applications.
Data from the transceiver is provided at a 15-pin D-SUB connector, separated into send, receive and collision information.
The transceiver generates this diagnostic data by digitization of internal analog signals.
The transceiver supports all 10G rated speeds for Ethernet, SONET, SDH or Fibre Channel networks.
When this is connected with the metal department of the transceiver, I remember other party's signal ever more strengthening.
Only on AUI connections(10Base5) is the transceiver fitted as an external component directly on the network cable.
The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the PIN photo-detector.
FT847-SuperControl® is able to read, edit, archive and send back clone files to the transceiver.
In Figure 5 and 6, the transceiver NCOs and LOs are all set to the same frequency.
Sayid manages to repair the transceiver, but it does not have a signal or much battery life.
The transceiver requires only 2μs Tx-Rx switching time, which includes frequency transient settling.
The transceiver recognizes the received FM or C4FM signal and automatically switches to this mode.
So a normal tuning on the transceiver itself will be detected and shown in the software vfo's.
The transceiver features the LoRa® long-range modem, providing ultra-long-range spread-spectrum communication and high interference immunity, minimizing current consumption.
The transceiver unit has a cascade of LNA, low-noise mixer, SAW filters and IF amplifiers, leading to an analog-to-digital converter ADC.
In IO-Link applications, the transceiver acts as the physical layer interface to a microcontroller running the data-link layer protocol.