在 中文 中使用 淬火 的示例及其翻译为 英语
{-}
-
Political
-
Ecclesiastic
-
Programming
淬火和回火（回火）的组合可以大大提高钢的整体性能。
The combination of quenching and tempering(tempering) can greatly improve the overall performance 氮化钢经氮化处理(480～580℃)，直接使用，不再经淬火与回火处理。
Nitrided steel is subjected to nitriding treatment(480～ 580℃) and used directly without quenching and tempering treatment.渗碳后，有时还需要其它热处理工艺，如淬火和回火。
After infiltration, some other heat treatment processes such as quenching and tempering are sometimes needed.由高碳钢和铸铁制成的工件也可通过感应加热淬火。
Workpieces made of high carbon steel and cast iron can also be quenched by induction heating.渗入元素后，有时还要进行其它折弯机刀具热处理工艺如淬火及回火。
After infiltration of the elements, other heat treatment processes such as quenching and tempering are sometimes performed.渗入元素后，有时还要进行其它顺德热处理工艺如淬火及回火。
After infiltration of elements, sometimes other heat treatment processes such as quenching and tempering.渗入元素后，有时还要进行其它顺德热处理工艺如淬火及回火。
After infiltration, some other heat treatment processes such as quenching and tempering are sometimes needed.如果磁体“淬火”，它就会迅速失去超导性，那么所储存的能量就会在几秒钟内就可以安全地消散。
Should the magnet“quench”- in other words, rapidly lose its superconductivity- this large stored energy is dissipated safely within just a few seconds.ER5钢的推荐热处理工艺：对高耐磨性、高强韧性的模具，采用1150℃淬火，520~530℃回火3次;
ER5 数控淬火机床.
CNC Induction Hardening Machine.恒进感应淬火机床.
调整淬火、回火温度和时间；.
焦炭干淬火设施模拟方案.
Model programme for coke dry quenching facilities.我们称这个过程为淬火效应。
I would describe it as fire flame effect.淬火与退火有什么区别？?
What is the difference between ELD and AOBRD?淬火处理可以增加硬度；3。
Hardening treatment can increase hardness;3.淬火与退火有什么区别？?
What is the difference between AOBRD and ELD?淬火后，钢变硬，但同时变脆。
After quenching, the steel becomes hard, but at the same time becomes brittle.淬火是钢铁材料强化的基本手段之一。
Quenching is one of the basic means of strengthening steel materials.淬火前，可能没有退好火，造成内应力过大.
(2) before quenching, may not retreat fire, causing internal stress is too large.
