温度为 - 翻译成英语

• temperature is
• temperature was

在 中文 中使用 温度为 的示例及其翻译为 英语

州历史最高温度为116华氏度（47摄氏度）出现在1936年7月14日，位于Collegeville。
The record high temperature for the state was 116 °F(47 °C) set on July 14, 1936 at Collegeville.

如果温度为270℃，停留时间不应超过8分钟。
If the temperature is 270° C, the residence time should not exceed 8 minutes.

当温度为210℃，机筒滞留时间就不能超过3分钟。
When the temperature is 210° C, the residence time can not exceed 3 minutes.

通常温度为90~120℃，SEI膜开始进入放热分解图….
Usually the temperature is 90~ 120℃, SEI film began to enter the heat decomposition(Figure 1).

而当温度为200℃时，这种反映会在几微秒内完成。
And when the temperature is 200 °C, this reflection will be completed in a few microseconds.

当温度为200℃，200bar的条件下羰基合成反应式如下：.
When the temperature is 200℃, 200 bar under the condition of carbonyl synthesis reaction is as follows.

如果温度为1200至1800°F（650至980°C），则每个热循环计为2次使用。
If the temperature is 1200 to 1800°F(650 to 980°C), each thermal cycle counts as 2 uses.

这里是如何：使用温度为例，楼宇自动化系统将允许您设置温度控制点，调度和关闭报警。
Here's how: using temperature as an example, a building automation system will allow you to set temperature control points, schedules and shut off alarms.

当温度为300°C时，热辐射的最强波长处于红外区域。
When the temperature is 300°C, the strongest wavelength of thermal radiation is in the infrared region.

但是，Cetus是为PLA设计的，它要求喷嘴温度为210摄氏度。
However, Cetus is designed for PLA, which requires the nozzle temperature to be 210 degrees Celsius.

如果大气中没有红外吸收剂，表面温度为~256K或-17℃。
If there were no IR absorbers in the atmosphere the surface temperature would be~ 256 K or -17 C.

该团队正在马拉加进行温暖的天气训练，温度为16度。
The team are on a warm weather training break in Malaga, where the temperature is 16 degrees.

因此，在加工前，必须对物料进行干燥，其干燥温度为150℃，4小时以上；一般为170℃，3-4小时。
Therefore, the material must be dried before processing, and its drying temperature is 150° C, more than 4 hours, generally 170° C, 3-4 hours.

此时的实际温度为.
From now on the actual temperature is.

周围环境温度为.
The environmental temperature is the:.

运行温度为650℃左右。
Operating temperature is about 650 °C.

背景辐射温度为2.7K。
Now the background temperature is 2.7 K.

水溶性（温度为25°C）.
Reference Water solubility 25°C.

夏天平均温度为18度。
In summer, the average temperature is 18 degrees.

通常测定的温度为298K。
Temperature is generally taken as 298 K.