在 英语 中使用 The connector 的示例及其翻译为 中文
{-}
-
Political
-
Ecclesiastic
-
Programming
The connector has a 50Ω impedance and works best in the 0-11 GHz spectrum.
Currently, most of the connector types are three-level full overlap, and a few use two-level overlap.
The Connector API allows building and running reusable producers or consumers that connect Kafka topics to existing applications or data systems.
Currently, it is sitting on the connector, and the connector is showing the obvious DRC placement error in green with the warning of“Collision”.
The connector manufacturer stated that around the confluent continuous current guided by the connector is the area where the highest temperature is generated.
The connector has a 50-ohm impedance and operates best in the 0- 11 GHz frequency spectrum.
Single-mode fiber: Generally, the fiber jumper is indicated by yellow, the connector and the cover are blue, and the transmission distance is long.
In this data sheet you can read all about the technical specifications of the Connector HRS 6 pin, female cable for your camera.
In terms of structure, the connector first meets the function of the connection, so it conforms to the structural design, and pin corresponds with pin.
Buy a new battery from the store, disconnect the connector, remove the old battery, install the new battery, and reconnect the connector. .
Following charging, the robot removes the connector and cable, with the vehicle once again ready for use again after a short period of time.
The Connector API enables developing and running reusable consumers or producers that provide connections for Kafka topics to existing data systems or applications.
Single-mode fiber: Generally, the fiber jumper is indicated by yellow, the connector and the cover are blue, and the transmission distance is long.
Therefore, the connector is often closed with a metal casing to prevent internal electromagnetic energy radiation or interference from external electromagnetic fields.
If the connector system is perceived to be deficient in wear performance, the contact lubricant will be sufficient to improve performance to meet application specifications.
The connector is one of the most important devices on the phone, on average, the number of connectors required for each handset reaches 8.