영어에서 Outer diameter 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
The Inner Diameter and Outer Diameter only refer to the PTFE Hose inside.
The minimum bend radius is 5 x outer diameter.
The Inner Diameter and Outer Diameter.
White Color PE Pour Spout Caps Screw Type Outer Diameter 10.5 Millimeter.
A smaller diameter(300mm outer diameter) steering wheel gives improved vehicle maneuverability. In addition, this compact.
The outer diameter surface of bearings is shaped to the crowned runner surfaces with R500( suffix U).
Tecapeek SM GF30 natural can be provided with a maximum length of 500 mm and a max outer diameter of 535mm. Walls of 3,5mm strength are the current lower limit to rings.
The outer diameter of regular Nord-Lock washers is designed for counterbore holes according to DIN 974, i.e. the washers fit under the head of standard bolts.
If the outer diameter exceeds 5.5 cm, the aneurysm is considered to be large.
height and outer diameter all within the customer's acceptable specifications.
condition on the screen, can modify products' outer diameter or angle etc at any time;
The low pressure type of the 125 type concrete pump pipe is a pipe with an outer diameter of Φ133, and the high pressure is a pipe with an outer diameter of Φ140; the pipe head.
The stall is made with hot dipped galvanized steel pipe, the pipe outer diameter is 61mm, the pipe thickness= 3mm, and with 0.2mm galvanizing layer.
For outdoor fiber optic cable cutover time. Open center beam tube outer diameter have four.
When enhancing the insulation, outer diameter of cable is increased for about 5%.
Suppose a company produces ball point pens and the target outer diameter for the ball is 0.35 mm.
max outer diameter is 400mm.
Round 304 304L 309S Seamless Stainless Steel Pipe 6mm-630mm Outer Diameter.
In many embodiments, the outer diameter of the distal tip generally does not exceed about 100 microns and is generally less than about 20 microns and more typically less than about 1 micron.
the characteristic dimensions of each UTS thread(outer diameter and pitch) were chosen as an inch fraction rather than a millimetre value.