After the update,Screen display needs to reopen,After restarting the vCenter Server Appliance,Will appear”NO NETWORKING DETECTED.
업데이트 후,화면 표시가 다시 필요,하여 vCenter 서버 어플라이언스를 다시 시작한 후,나타납니다”NO 네트워킹은 신호가 없습니다.
Backup environment must have the vCenter Server,Can use this backup tool。
백업 환경은하여 vCenter 서버가 있어야합니다,이 백업 도구를 사용할 수。
ESXi host is disconnected from vCenter Server due to sfcbd exhausting inodes ESXi hosts disconnect from vCenter Server and cannot be reconnected to the vCenter Server.
After you upgrade vCenter Server 4.x to 5.5 Update 1, vCenter Server is inaccessible through vSphere Web Client* When you upgrade from vCenter Server 4.x to 5.5 Update 1, the vCenter Server is not visible through vSphere Web Client.
VCenter Server 4. x에서 5.5 업데이트 1로 업그레이드한 후 vSphere Web Client를 통해 vCenter Server에 액세스할 수 없음* vCenter Server 4. x에서 5.5 업데이트 1로 업그레이드하면 vSphere Web Client를 통해 vCenter Server를 볼 수 없습니다.
Attempts to start HTML console from the vSphere Web Client might fail Attempts to open a virtual machine console in the vSphere Web Client might fail if the vCenter Server is installed with a custom port
VSphere Web Client에서 HTML 콘솔을 시작할 수 없음 vCenter Server가 사용자 지정 포트로 설치되고 VMRC(VMware Remote Console) 플러그인이 설치되지 않은 경우 vSphere Web Client에서 가상
Locale related race condition might cause the vCenter Server to stop responding The issue is related to a locale related race condition which causes the vCenter Server to stop responding.
로케일 관련 경합 조건으로 인해 vCenter Server가 응답을 멈출 수 있음 이 문제의 원인은 vCenter Server가 응답을 멈추게 하는 로케일 관련 경합 조건입니다.
Ensure secure access to the vCenter Server Appliance When the vCenter Server Appliance is configured to use a directory service such as Active Directory or NIS(Network Information Service), all users have local shell log in privileges.
VCenter Server Appliance에 대한 안전한 액세스 보장 vCenter Server Appliance가 Active Directory 또는 NIS(네트워크 정보 서비스)와 같은 디렉토리 서비스를 사용하도록 구성된 경우 모든 사용자가 로컬 셸 로그인 권한을 갖습니다.
Inconsistent Core Utilization value is reported in the real-time CPU performance chart On ESXi hosts with Hyper-Threading enabled, the Core Utilization value reported in the CPU performance chart when viewed through the vSphere Client or the vCenter Server is twice the value reported through esxtop core utilization.
이 문제는 이 릴리스에서 해결되었습니다. 실시간 CPU 성능 차트에 일관되지 않은 코어 활용률 값이 보고됨 하이퍼스레딩을 사용하도록 설정한 ESXi 호스트에서, vSphere Client 또는 vCenter Server를 통해 CPU 성능 차트를 볼 때 여기에 보고되는 코어 활용률 값이 esxtop 코어 활용률을 통해 보고되는 값의 두 배입니다.
The vSphere Web Client does not load the vCenter Server inventory if the vCenter Server host name cannot be resolved If the vSphere Web Client cannot resolve the vCenter Server system's host name and the vCenter Server is registered with the vSphere Client using an IP address, the vSphere Web Client cannot load the inventory tree.
VCenter Server 호스트 이름을 확인할 수 없는 경우 vSphere Web Client에 vCenter Server 인벤토리가 로드되지 않음 vSphere Web Client에서 vCenter Server 시스템의 호스트 이름을 확인할 수 없고 IP 주소를 사용하여 vCenter Server가 vSphere Client에 등록되어 있으면 vSphere Web Client가 인벤토리 트리를 로드할 수 없습니다.
None vCenter Server takes an unusually long time to start and the vSphere Client might time out When a large number of permissions are assigned to objects in the vCenter Server inventory, the vCenter Server service does not start as quickly as expected as vCenter Server verifies that the users and groups exist in the identity source.
VCenter Server를 시작하는 데 비정상적으로 오랜 시간이 걸리고 vSphere Client에 시간 초과가 발생할 수 있음 vCenter Server 인벤토리의 개체에 많은 수의 권한을 할당할 경우 vCenter Server가 사용자와 그룹이 ID 소스에 존재하는지 확인해야 하므로 vCenter Server 서비스가 예상과 달리 빠르게 시작되지 않습니다.
VCenter Server might stop responding when Virtual SAN VASA provider is being re-registered The vCenter Server might stop responding, if the host is being rebooted or if there is an issue with the connection to the host, when a Virtual SAN VASA provider is being re-registered after a prior failure.
VCenter Server는 Virtual SAN VASA 공급자가 재등록되는 동안 응답하지 않을 수 있음 vCenter Server는 Virtual SAN VASA 공급자가 이전 장애 이후 재등록되는 동안 호스트가 재부팅 중이거나 호스트에 대한 연결에 문제가 있을 경우에 응답하지 않을 수 있습니다. 해결 방법.
VCenter Server takes an unusually long time to start and the vSphere Client might time out When a large number of permissions are assigned to objects in the vCenter Server inventory, the vCenter Server service does not start as quickly as expected as vCenter Server verifies that the users and groups exist in the identity source.
VCenter Server를 시작하는 데 비정상적으로 오랜 시간이 걸리고 vSphere Client에 시간 초과가 발생할 수 있음 vCenter Server 인벤토리의 개체에 많은 수의 권한을 할당할 경우 vCenter Server가 사용자와 그룹이 ID 소스에 존재하는지 확인해야 하므로 vCenter Server 서비스가 예상과 달리 빠르게 시작되지 않습니다.
VCenter Server takes an unusually long time to start and the vSphere Client might time out When a large number of permissions are assigned to objects in the vCenter Server inventory, the vCenter Server service does not start as quickly as expected because vCenter Server verifies that the users and groups exist in the identity source.
VCenter Server를 시작하는 데 비정상적으로 오랜 시간이 걸리고 vSphere Client에 시간 초과가 발생할 수 있음 vCenter Server 인벤토리의 개체에 많은 수의 권한을 할당할 경우 vCenter Server가 사용자와 그룹이 ID 소스에 존재하는지 확인해야 하므로 vCenter Server 서비스가 예상과 달리 빠르게 시작되지 않습니다.
VCenter Server 5.5 past day performance chart displays a 10 minute gap in data after every 20 minutes If you set the retention period for a maximum period of 5 days and select the lowest collection interval, the vCenter Server 5.5 performance chart for the past day displays a 10 minute gap in data after every 20 minutes.
VCenter Server 5.5 전날 성능 차트에서 20분마다 데이터에 10분 간격이 표시됨 보존 기간을 최대 기간인 5일로 설정하고 수집 간격을 가장 낮은 값으로 선택하는 경우 vCenter Server 5.5 전날 성능 차트에서 20분마다 데이터에 10분 간격이 표시됩니다.
However the MAC address entry of the ethernet device of the virtual machine is not a part of the journal and hence the MAC entry in the vCenter Server entry is not released even when the virtual machine is rolled back because of operation failure Repeated failures might result in many un-freed entries that are not used by any virtual machines.
하지만 가상 시스템의 이더넷 디바이스에 대한 MAC 주소 항목은 저널에 속하지 않으므로 작업이 실패하여 가상 시스템이 롤백되는 경우에도 vCenter Server 항목의 MAC 항목이 해제되지 않습니다. 이 실패가 반복되면 가상 시스템에 사용되지 않는 항목 중 해제되지 않은 항목이 많이 발생할 수 있습니다.
Remove the host from the vCenter Server.
VCenter Server에서 호스트를 제거합니다.
After the service starts, connect to the vCenter Server.
서비스가 시작되면 vCenter Server에 연결합니다.
Next the vCenter Server Setup wizard will be started.
VCenter Server 설정 편집 마법사가 열립니다.
This stops from adding the host back to the VCenter Server.
이로 인해 vCenter Server에 호스트가 다시 추가되지 않습니다.
Search queries do not return results from the vCenter Server system.
English
عربى
Български
বাংলা
Český
Dansk
Deutsch
Ελληνικά
Español
Suomi
Français
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
日本語
Қазақ
മലയാളം
मराठी
Bahasa malay
Nederlands
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt
中文