영어에서 These measurements 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Read how these measurements differ dependent on the product characteristics, method of production, quality benchmarks and type….
Make sure that you write down these measurements so that you can refer to them later on.
That would only amount to 1.4 percent of agricultural land,[1] but these measurements based on national data from organic certifiers may be a vast underestimation.
(BIPM, France), combines these measurements to retrospectively calculate the weighted average that forms the most stable time scale possible.
About Size: Size may be 2cm/1 inch inaccuracy due to hand measure. These measurements are meant as a guide.
Often, these measurements are done in blood and urine.[7].
These measurements were recorded during several loading and unloading cycles for three months after which the monitoring system(including the sensors), was completely removed due to environmental reasons.
Based on the calculated gain averages, it appears that for the particular sensor used in these measurements, a nominal gain setting of 1.35× actually yields a gain of 1.44×.
In addition, the metrology proxy measurements performed by the inspection system may be used for relatively frequent monitoring of the process because these measurements may be performed much quicker than the measurements performed by metrology tools.
Class 1 laser certification assures safe operation under all conditions of normal operation and makes these measurements accessible to a wide number of laboratories.
Astronomer Barry Setterfield has studied these measurements, especially their precision
These measurements were not very accurate because the relationship between process pressure or temperature and density are not always precisely known--each sensor adds its own separate error to the overall measurement error,
These measurement arms are able to determine and record the location of a probe in 3D space and report the results through software.
As glass measurements are conducted over night, these measurement can usually be conducted during the whole year.
To be able to evaluate these measurement results, the function and working method of the drive components must be considered.
These measurement points were then resealed once installation was complete. Calibration of the measurement system.
Many of these measurements greatly surprised evolutionary scientists.
Results from these measurements deliver essential information for device fabrication.
These measurements are the ones utilized universally and by printers.
The mean value of these measurements tends towards the true value.