Exemples d'utilisation de Mm in diameter en Anglais et leurs traductions en Français
{-}
-
Official
-
Colloquial
Measuring 42.5 mm in diameter and 11.5 mm thick, this reasonably sized case is graced with beautifully balanced lines.
The parts produced have dimensions of about 2-20 mm in diameter and a length up to 250 mm. .
Beautiful cultured pearl choker of White color and 7 to 8 mm in diameter.
Beautiful cultured pearl bracelet of Black color and 7 to 8 mm in diameter.
this timepiece features an elegant round steel case measuring 33 mm in diameter.
Universal Pen Holder/ Black accepts pen/pencils from 6.5 mm to 10 mm in diameter.
Damage generally begins near the upper part of the crown on branches measuring approximately 20 mm in diameter.
Beautiful cultured pearl bracelet of White color and 7 to 8 mm in diameter.
Beautiful cultured pearl choker of Black color and 7 to 8 mm in diameter.
12 to 18 mm in diameter.
The nominal dimensions of the lamp shall be 360 mm in length by 9.5 mm in diameter.
7 mm in diameter.
the case of the L.U. C Time Traveler One measures 42 mm in diameter, an ideal size for any wrist
The igniter assembly consists of a cylindrical container 21 mm in diameter and 64 mm which is made from 0.54 mm thick cellulose acetate which is held together by two layers of nylon filament reinforced cellulose acetate tape.
The camera is small paw 65mm in length to 19 mm in diameter, with a weight not exceeding 20 grams,
It is 11 mm in diameter and 26 mm in length,
The open centre of the dial of this 45 mm in diameter 18-carat yellow gold timekeeper gives a view on the extraordinary engraving craftsmanship made on most parts of the movement's components on the dial side.
Available in three sizes- measuring 46, 42 and 38 mm in diameter- this diver's watch water-resistant to 200 m(660 ft) echoes the functional
The iWM BS400P/ BS550P is designed for longitudinal sawing of logs from 150 to 400 mm in diameter to double-edged beams
a cylinder 10 mm in diameter and 38 mm in length shall be inserted into the actuation portion of the buckle in order to determine its compliance with the requirements of subsection 6.1.