Exemples d'utilisation de Specific identification code en Anglais et leurs traductions en Français
{-}
- 
                        Official
                    
 - 
                        Colloquial
                    
 
The specific identification code shall comprise the starting letters"MD" for"Module" followed by the approval marking without the circle as prescribed in paragraph 4.2.1.; this specific identification 
This specific identification code shall comprise the starting letters"MD" for"MODULE" followed by the approval marking without the circle as prescribed in paragraph 5.2.1.1. below and, in the case several non-identical light source modules are used, followed by additional symbols or characters; this specific identification code shall be shown in the drawings mentioned in paragraph 3.2.1. above.
This specific identification code shall comprise the starting letters"MD" for"MODULE" followed by the approval marking without the circle[and, if necessary for differentiation,
Monitoring of maritime radio equipment on board ships Maritime radio equipment uses specific identification codes.
LED module specific identification code.
An original replacement brake disc or drum which is marked with its specific identification code is not subject to this Regulation.
a light generator, the specific identification code of the module shall be stated.
contain sufficient details to identify it and the position intended for the specific identification code and the trademark of the applicant.
This marking shall be given by a specific identification code, which is in principle the approval number of the lamp firstly approved with that module.
reserved for the specific identification code(s) of the modules.
it shall be marked with its specific identification code(s), the rated input voltage and wattage.
the light source module specific identification code.
also the space(s) reserved for the specific identification code(s) of the module(s);
This specific identification code shall comprise the starting letters"MD" for"MODULE" followed by the approval marking without the circle as prescribed in paragraph 5.5.1. below; this specific  identification code shall be shown in the drawings mentioned in paragraph 3.2.2. above.
The light source module specific identification code; and/or.
This specific identification code…, but both markings shall be from the same applicant.
The specific identification code(if any) used by each agency.
The LED module specific identification code, if any.
LED module or light generator specific identification code.
Iii The light source module specific identification code;