Examples of using 模量 in Chinese and their translations into English
{-}
-
Political
-
Ecclesiastic
-
Programming
高模量合成纤维.
模量为钢丝或玻璃纤维的2-3倍。
Specific modulus is 2 to 3 times the one of steel wire or glass fiber.这使得PDMS弹性模量减少了两倍。
This makes the PDMS elastic modulus decrease by a factor of two.其抗拉强度和弹性模量分别为125GPa和1.1TPa。
Tensile strength and elastic modulus is 125GPa and 1.1TPa, respectively.由航空碳纤维制成，具有4K认证（高模量）。
Made of aeronautical carbon fiber with 4K certification(high modulus).硬质PVC具有良好的机械性能，其弹性模量可达到1500-3000MPa。
The rigid PVC has good mechanical properties and its elastic modulus can reach 1500-3000 MPa.硬质PVC具有良好的机械性能，其弹性模量可达到1500-3000MPa。
Rigid PVC has good mechanical properties and its elastic modulus can reach 1500-3000MPa.低模量FRP是木材弹性模量的两倍，但比钢小10倍（E=2.1×105）。
The elastic modulus of FRP is two times larger than that of wood, but it is ten times smaller than that of steel(E=2.1×106).当温度为300～400℃时，钢的强度和弹性模量显著降低。
When 低模量FRP是木材弹性模量的两倍，但比钢小10倍（E=2.1×105）。
The elastic modulus of FRP is twice as large as that of wood, but 10 times smaller than steel(E=2.1×106).就强度而言，应考虑抓地力以及抗篡改性和弹性模量。
In terms of strength, the grip strength and the tamper resistance and elastic modulus should be considered.(3)橡胶减振器弹性模量比金属小得多，可产生较大弹性形变;
(3) elastic modulus is much smaller than the metal, can produce greater elastic deformation;(3)橡胶减振器弹性模量比金属小得多，可产生较大弹性形变;
The elastic modulus of rubber is smaller than that of metal, which can produce large elastic deformation;高性能型碳纤维制品又分为高强型（强度2000MPa、模量250GPa）和高模型（模量300GPa以上）。
High-performance carbon fibers are also divided into high-strength type(strength 2000MPa, modulus 250GPa) and higher model(modulus 300GPa above).钢的弹性模量是聚乙烯的近200倍（碳素钢的弹性模量在1900….
The elastic modulus of steel is nearly 200 times that of polyethylene(the elastic 铬的弹性模量也低于钼和钨。
Chromium's modulus of elasticity is also lower than that of molybdenum and tungsten.钛合金的弹性模量约为钢的1/2。
The modulus of elasticity of titanium alloy is about 1/2 of that of steel.弹性模量324GPa，提高10%，正进入产业化阶段。
Modulus of elasticity 324GPa, 10%, is entering the stage of industrialization.模量大于450GPa的称为超高模子。
The modulus is larger than 450GPa called 模量大于450GPa的称为超高模型。
The modulus is greater than 450GPa, called 
