MODULUS in Chinese translation

• 模量
• 模数
• 取模

Examples of using Modulus in English and their translations into Chinese

I imagine the first if statement I will need to use modulus, would if(num== 100%10) be correct?
我想象我需要使用模数的第一个陈述，是否if(num==100%10)正确？?

Adding plasticizer can reduce the melt viscosity, glass temperature and elastic modulus of the elastomer without changing the basic chemical properties of the plasticized material.
加入增塑剂可以降低熔体粘度、玻璃化转变温度和产品的弹性模量而不会改变被增塑材料的基本化学性质。

It uses modulus 11 requiring the remainder of the sum when added to the last digit to be equal to 11.
它使用模数11，当加到最后一位时，需要剩余的和等于11。

Apart from plant capacity expansion, numerous companies are developing advanced glass fibers, with a trend toward increased tensile strength, modulus and temperature resistance.
除了工厂产能增大之外，一些公司正在研发先进玻璃纤维，其趋势是提高拉伸强度、模量和耐热性。

(If you think I'm exaggerating, do some calculations on the energy to break a 1000-decimal-digit modulus.).
如果你认为我夸大了，可以对能量进行一些计算来打破1000位小数模数。

At 104 GPa at room temperature, the modulus of elasticity of niobium is less than that of tungsten, molybdenum or tantalum.
在104GPa、室温条件下，铌的弹性模量低于钨、钼或钽。

MMC leads this integration process and then partners with our sister company, Modulus MEP, for the actual production of the modules.
MMC领导这一整合过程，然后与我们的姊妹公司合作，，模数MEP，用于模块的实际生产。

Physical properties, such as tensile and impact strength and elongation and modulus, sometimes change during this induction period;
物理性能如拉伸强度、冲击强度、伸长率和模量可能在诱导期内引起变化；.

Adding plasticizer can reduce the melt viscosity, glass temperature and elastic modulus of the elastomer without changing the basic chemical properties of the plasticized material.
添加增塑剂可以降低塑料的熔融粘度，玻璃化转变温度和弹性体的弹性模量，而不会改变塑化材料的基本化学性质.

The initial Montefibre 80k product range will consist of the M500 and M600, both qualities for non-aerospace use, with standard modulus(SM).
最初的Montefibre80K产品系列包括M500和M600，两者均用于非航空航天用途，具有标准模量（SM）。

When the temperature is between 300° C and 400° C, the strength and elastic modulus of the steel are significantly reduced.
当温度在300～400℃之间时，钢的强度和弹性模量显著降低。

According to the provisions of GB1239, when the working temperature of common coil springs exceeds 60°C, the shear modulus should be corrected.
根据GB1239，当普通盘簧工作温度超过60℃时，应修正剪切模量。

Elastic Modulus TC4 of E= 110GPa, about 1/2 of steel, it is prone to deformation when machining titanium alloys.
TC4的弹性模量E=110GPa，约为钢的1/2，故钛合金加工时容易产生变形。

The fineness modulus for this test is 3.02, indicating a relatively coarse aggregate.
本试验的细度模量为3.02,表示相对粗糙的骨料。

CFC-113 is used as a process agent in the production of high modulus polyethylene fibre. This use was the subject of a careful Panel review in 2005.
生产高模聚乙烯纤维时1,1,2-三氯-1,2,2-三氟乙烷被用作加工剂，2005年评估小组对这一用途进行了详细审查。

The same value of the modulus and the tensile strength were observed at 5 wt% of CNTs.
这个模数的同一个值和抗拉强度被观察了在5wt%CNTs。

Low modulus of elasticity: titanium elastic modulus at normal temperature is 106.4 GMPa, 57% of the steel.
弹性模量低：钛的弹性模量在常温时为106.4GMPa,为钢的57%。

The modulus(absolute value) of a complex number x can be computed using the built-in abs() function.
一个复数x的模数（绝对值）可以通过内置函数abs()计算。

The researchers used these measurements to calculate the elasticity modulus(Young's modulus) for the nanospheres.
研究者们利用这些测量来计算纳米球的弹性模量(杨氏模数：Young'smodulus)。

While the private key remains only in memory, the public keys' modulus n is sent to the attacker's server.
尽管私钥仅保留在内存中，但公钥的模数n被发送到了攻击者的服务器。