焊接过程 in English translation

• welding process
• the soldering process

Examples of using 焊接过程 in Chinese and their translations into English

焊接过程中使用激光器-特别是使用固态激光器-可以在生产过程中进一步挖掘降低成本的潜力。
The use of lasers in welding processes- especially the use of solid-state lasers- can open up more cost-cutting potential in production.

虽然这增加了焊接过程的角度和范围，关节机器人需要更大的工作区域，以避免与邻近设备发生意外碰撞。
Although this increases the angular reach and scope of the welding process, articulating robots require larger working zone to avoid accidental collision with neighboring equipment.

(1)在焊接过程中，对熔化金属进行机械保护，使之与空气隔开。
(1) in the process of welding, mechanical protection of molten metal is made to separate it from the air.

此外，它还包括焊接过程中通风透气等一些有用信息，全面考虑安全要求。
Additionally, it contains helpful information on ventilation during welding as well as general safety considerations.

最具代表性的是焊接过程的模糊控制、神经网络控制，以及专家系统的研究。
The most representative is the fuzzy control of welding process, neural network control, and the research of expert system.

在技术过程中，美国桑迪亚国家实验室和PrattWitney联合开展了激光焊接过程中粉末金属和线材添加的研究。
On the view of technology, American Sandia National Laboratory and Prattwitney had started the study of adding powder metal and metal wire while welding process.

疾病控制和预防中心（CDC）长期以来一直警告焊接过程中锰烟的潜在神经学影响。
The Centers for Disease Control and Prevention(CDC) has long warned about the potential neurological effects of manganese fumes during welding processes.

各行业的制造单位正在安装自动焊接装配线，以达到焊接过程中的最大速度，从而生产出更好的产品。
Manufacturing units across industries are installing automated welding assembly lines to attain maximum speed of the welding process and yield better products.

当前的焊接过程停止。
The current welding process stops.

当前的焊接过程停止。
The current welding process is stopped.

S31803焊接过程中应该注意以下三方面问题：.
UNS S31803 welding process should pay attention to the following three aspects.

此外，Mecalux采用的自动化焊接过程采用最先进的技术。
Moreover, the automated welding processes used by Mecalux are the most advanced in the market.

来自一些焊接过程或设备的噪声会损伤听力。
Noise from some processes or equipment can damage hearing.

因此在焊接过程中，它是一个必须严格控制的参数。
Therefore, it is a parameter that must be strictly controlled during the spot welding process.

因此，在焊接过程中，它是一个必须严格控制的参数。
Therefore, in the process of spot welding, it is a parameter that must be strictly controlled.

当达到一定的焊接时间和焊接深度时，整个焊接过程就完成了。
When a certain cooling and solidification time and welding depth are reached, the entire welding process is completed.

焊接过程中，必须看到均匀完整的接头(鱼鳞形状最好)，无间接、无漏焊。
The welding process, must look at the even and full solder joints(the best fish scales), no indirect, no leakage welding..

关键的区别在于，在焊接过程中，瞬态热源会迅速熔化并固化材料。
The key difference is that in welding, the transient heat source melt and solidify the materials rapidly.

科学家们将相关研究与焊接过程中的风险以及焊接烟雾是否致癌进行了比较。
The scientists compared relevant studies to the risks during welding and whether welding smoke is carcinogenic.

当细棒和相邻材料随后在电弧焊接过程中熔化时，纳米颗粒消除了不均匀的流动问题。
When the rods and adjacent material were subsequently melted in an arc welding process, the nanoparticles eliminated the uneven flow issue.