WELDING PROCESS in Chinese translation

• 焊接工艺
• 焊接过程

Examples of using Welding process in English and their translations into Chinese

Good welding performance, to meet the bellows in the production process of the welding process requirements.
良好的焊接性能，满足波纹管生产工艺中焊接工艺的要求。

The current welding process is stopped and cannot be restarted until the temperature.
当前焊接过程已停止，在温度降低之前，不能重新启动。

Supported Keystone Tower Systems to develop an innovative spiral welding process for wind turbine towers.
支持KeystoneTowerSystems开发一个创新的风力涡轮机塔螺旋焊接工艺。

The welding process is automated, intelligent is an important direction to improve the quality of welding quality and solve the harsh working conditions.
焊接过程自动化，智能化是提高焊接质量稳定性，解决恶劣劳动条件的重要方向。

The analysis of these differences can help to understand the characteristics of each gas is how it affects the welding process and weld deposit.
分析这些差异能帮助了解每种气体的特性是如何影响焊接工艺和焊接熔敷的。

One of the main advantages of high frequency welding process is that it can process the steel pipe at high speed.
高频焊接过程的主要优势之一是，它能够对钢管进行高速加工。

A common feature of various press-welding methods is the application of pressure during the welding process without filler material.
各种压焊方法的共同特点，是在焊接过程中施加压力，而不加填充材料。

Depending on the materials being welded, these atmospheric gases can reduce the quality of the weld or make the welding process more difficult to use.
依据被焊接材料的不同，这些环境气体会降低焊缝的质量，或使焊接工艺难以进行。

The application of intelligent welding robot is an important symbol of high automation of the welding process.
智能焊接机器人的应用，是焊接过程高度自动化的重要标志。

Pressure welding is a welding method that must be applied to the weldment during heating(or not heating) to complete the welding process.
压焊是焊接过程中必须对焊件施加压力(加热或不加热)来完成焊接过程。

It is an accurate, but relatively slow process, which prolongs the duration of the welding process and thus contact with hazardous substances.
这是一个准确但相对较慢的过程，它延长了焊接过程的持续时间，从而与有害物质接触。

Since the unit cost of helium than argon, so the welding process which increases the average cost per foot.
由于氦气的单位成本高于氩气，因此，这就增加了焊接过程中平均每英尺成本。

The welding process, must look at the even and full solder joints(the best fish scales), no indirect, no leakage welding..
焊接过程中，必须看到均匀完整的接头(鱼鳞形状最好)，无间接、无漏焊。

The welding stress and deformation caused by the welding process of ERW welded pipe often reduce the quality of welded products and even cause cracks.
厚壁钢管在焊接过程中产生的焊接应力和各种变形，往往使焊接产品质量下降，甚至造成裂纹。

The most common gas welding process is oxyfuel welding, also known as oxyacetylene welding..
最常见的气焊工艺是可燃气焊接，也称为氧乙炔焰焊接。

The technology is based on the company's resistance welding process, which has been used by manufacturers in the automotive, medical and solar industries since 1984.
该技术基于本公司的电阻焊接工艺，它已经被汽车制造商使用，1984年以来的医疗和太阳能工业。

However, if a high-quality welder is used, the parameters are selected appropriately, and a very stable welding process can be obtained to minimize the splash.
但如采用优质焊机，参数选择合适，可以得到很稳定的焊接过程，使飞溅降低到最小的程度。

The materials are produced in-house, where they also design the printer technology to incorporate the electromagnetic welding process into the 3D printer itself.
这些材料是内部生产的,此外它们还在设计打印机技术,将电磁焊接工艺纳入3-D打印机内部。

Flux-cored gas shielded welding(referred to as FCAW-G) is a widely used welding process, as shown in Figure 1.
药芯焊丝气保焊（简称FCAW-G）是一种应用非常广泛的焊接工艺，如图1所示。

Processors that are successful in using ultrasonic welding typically share two principal traits: they have a well-documented, validated welding process;
成功使用超音波焊接的处理器通常具有两个主要特征：它们具有良好的文件化，验证的焊接工艺;