Examples of using Stroke length in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Whether the pump is on or off, the stroke length can be adjusted by using the stroke adjusting handle.
The output capacity is determined by the speed of the stroke on the drive end, diameter of the pump head, and the stroke length.
If your actuator stroke length requirement is less than 50mm, we can also customized.
450 thrusts a minute(without any load) but it only has a stroke length of 2"/5cm and that is not adjustable.
That is due though to the short stroke of this machine, you also have no way of altering the stroke length so what you get is what you are stuck with I'm afraid.
Product Description Application Hydraulic metering pump either can be manual control and automatic control whether in stroke rate or stroke length And after those year s development the life time of these metering pump is increase and become more.
Application This kind of series pump can be used for large range requirement due to different module as single or double pump head it controlled by manual stroke length adjustable for the automatic control which can installed with a variety of.
actuator is retracted and at the same time independent of the stroke length.
to different module as single or double pump head, it controlled by manual stroke length adjustable, for the automatic control which can installed with a variety of Controller.
Stroke lengths 2000mm and longer.
Stroke lengths to 12000mm or longer.
Compatible with most 75 ohm compression connectors and can change between stroke lengths to accommodate many connector types.
Optional stroke lengths: 6" 8" 10" 12" 16", other special size(50~600mm) can be customized, pls refer to following data sheet to choose the one(A~N)
Stroke length adjustment.
Manual adjustment of stroke length.
Manual control of stroke length.
Effective stroke length(mm) 20-1000.
Control: manual adjustment of stroke length.
Stroke Length: 177.8 mm/ 7 inch.
Simple adjustment of metering capacity through stroke rate and stroke length.