Examples of using The pressure difference in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Due to the increasing dust area ash in the filter bag, the pressure difference increases.
Even if the pressure difference is very large, the structure of the component itself is unchanged.
(2) the pressure difference is big, the precision is high, and the measuring range is wide.
With this design, the sealing performance of the valve would never be influenced by the fluctuation of the pressure difference in pipeline.
When the pressure difference between inlet and outlet is large, the solenoid valve is difficult to open and cannot run quickly.
Equipped with a safety valve at the top of cement silo, cement silo used to balance the pressure difference between inside and outside.
Equipped with a safety valve at the top of the silo, storage silo used to balance the pressure difference between inside and outside.
Reduce the pressure difference of the system significantly, thereby improving the overall performance of the system and the service life of the cloth bag.
When a filter core is blocked and the pressure difference between the inlet and outlet reaches 0.35mpa, the transmitter will send out a signal.
If the pressure difference between the inlet and outlet of the solenoid valve is greater than the valve opening capacity, the solenoid valve will not open;
Area I: The pressure difference between the two ends of the valve, p0-p2 is lower than the spring presetting pressure, and the constant pressure difference is fully open.
High pressure pump is mainly to add pressure of the inlet water into a certain standard so that the pressure difference will be enough for the Reverse Osmosis need.
When the pressure difference of the filter is out of range, there will be a display alarm on the touch screen and an audible alarm on the automatic control box.
Area Ill: The pressure difference is so large that the constant pressure differential valve has moved to the stroke end and it is no longer possible to maintain a constant differential.
When the tricone bit iadc 117 is working the teeth on the main cone and the secondary cone of the cone are crushed by the formation while being subjected to the reaction force of the formation causing the high frequency sloshing of the cone along the axial direction and the pressure difference between the inside and.