Examples of using Mandrel in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Each mandrel has 4 grooves,
The mandrel is driven by a hydraulic motor which is coupled to a pneumatic disc brake.
The mandrel is suitable for large tension coiling
Avoid impact on the mandrel grease system caused by coil seizing, etc.
Length, Width and Thickness measurement: Graduated mandrel, Ruler and Thickness gauge are used for this purpose.
Welcome to get the high quality single mandrel uncoiler for steel pipe and tube mill from us.
The screw mandrel of this machine is flexible, so the conveying line can be arranged according to the space curve.
The mandrel should be pressed in slowly during assembly(oil press is recommended).
Reducing the tube without an ID mandrel or plug renders a rough surface on the ID of the tube.
After annealing, the process may continue with the ID plug or mandrel or it may switch to a sink process as described previously.
(Pneumatic): Option in case of pneumatic mandrel expansion is provided, refer to coil weight.
Using imported high-purity magnesium oxide mandrel and magnesium power for filling, high thermal conductivity.
it can bend in both directions and freely control the mandrel expansion and contraction, so it can process more
The rivet gun comes with a vacuum powered mandrel collection system, this systems collects the spent rivet mandrels, which keeps them
then put back the coil with mandrel together to basement.
DOM is short of Drawn Over Mandrel, to produce specialty tubing,
An adjustable Vacuum System control located inside the mandrel collection bottle allows you control the force of the air needed to hold the rivet in place or you may operate with the vacuum system turned off.
In case of a relatively large interference, provide both the ID of the housing and the OD of the Bearing with chamfers, and fit the Bearing into the housing with mandrel for easy installation.
adopt screw mandrel type structure to ensure that the extrusive molten material is evenly, and the blown plastic film has fine surface gloss,
After the OD and ID are lubricated and an ID plug or mandrel is inserted, the tube is pulled through the dies.