Examples of using The rollers in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Before starting the feeder, pay attention to check whether there is dirt between the rollers and whether there are foreign objects between the gears.
The rollers are cylindrical in shape and crowned at the end in order to reduce the stress concentrations.
Three roller mills adjust the clearance between the rollers by controlling the horizontal hand-wheel screw.
Take continuous production, there is no need to change the rollers in rough-forming section.
With the necessary decorative materials such as natural fiber tape or felt, the rollers need no paint.
The rollers lift up the epidermis and subcutaneous fat layer, after massaged the fat turned into fatty acids and removed out of body.
traveled rearward 4 mm, the locking piece is withdrawn fully from the bolt head and the rollers are compressed into the bolt head.
more accurate forming rollers, avoid the deformation during heat treatment and ensure the rollers' preciseness and wear-resisting ability.
Whether there is dirt between the rollers and whether there are foreign objects between the gears.
The rollers lift up the epidermis and subcutaneous fat layer,
The rollers are adjusted so that the space between them is slightly narrower than the width of the wheat kernels.
Precise- All the rollers are CNC lathe processed and polished on the surface to guarantee the accuracy.
It is important that the design eliminates any distortion which can lead to misalignment of the rollers.
Specially designed noise-reduction track rail produces noise greatly, ensure the rollers run smoothly.
Thanks to the rollers straightening system it is the best solution to straight and cut round
(3)Roller material: Cr15 steel with quenching, The rollers are plated with hard chrome with thickness of 0.05mm on the surface after being machined by the exact machine tool.
In addition, the rollers are still rarely come across in the film instagrama,
Construction: The inner and outer ring race ways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing.