EXTRUDED in Chinese translation

• 挤出
• 挤压
• 挤塑
• 膨化

Examples of using Extruded in English and their translations into Chinese

Good measure of toothpaste: First consistency should be appropriate, extruded from the hose into strips, both covering the teeth, not to splash.
好牙膏的衡量标准：一是稠度要适当，从软管中挤出成条，既能覆盖牙齿，又不至飞溅。

If the temperature of the extrusion tube is higher than 470° C, the extruded waste will rise.
如果挤压筒温度高于470℃，挤压废品就会上升。

Unlike other forms of cellulose, cellulose acetate can be dissolved in acetone and extruded through the nozzle of a 3D printer.
与其他形式的纤维素不同的是，乙酸纤维素可以溶解在丙酮中并通过3D打印机的喷嘴挤出。

Starting from powdered or granular solid material, hot products extruded from the die, through a complex process of change of temperature.
从粉状或粒状的固态物料开始，高温制品从机头中挤出，经历了一个复杂的温度变化过程。

This is because most of the grease in the open bearing has been extruded, and the grease in the sealed bearing has also been lost.
这是由于开放式轴承中的润滑脂大部分已被挤出，而且密封式轴承中的润滑脂也已经漏失的缘故。

EconCore's patented technology uses a series of high-speed operation lines to produce a single continuous extruded thermoplastic film honeycomb structure.
核心提示：EconCore的专利技术是使用一系列高速操作的生产线来生产单一连续挤出热塑性薄膜的蜂窝结构。

It contains water so it's not a solid and can easily be extruded using a 3D printer.
教授说，它含有水分，所以它并不坚固，很容易用3D打印机挤出。

Nylon 6/6- Nylon 6/6 is a general purpose nylon that can be both molded and extruded.
尼龙6/6是一种通用的尼龙，可以模制和挤出。

Extruded blades do not provide this efficient, consistent air movement and they require a greater number of blades to help compensate.
挤塑成型叶片不能提供高效、均衡的空气流动，它们需要更多叶片来补充风量。

In different parts of the prints, there is a change in the extruded thread, which will affect the final print quality.
在打印件的不同部分，挤出丝有变化，这将影响最终的打印质量。

The gas in the melt can be“extruded” to reduce the air bubbles on the surface of the product, internal bubbles, and improve gloss uniformity.
可将熔料内的气体“挤出”，减少制品表面的气花、内部气泡、提高光泽均匀性。

Our array of extruded thermoplastic films can add imaginative design to packaging and amplify a product's message to consumers.
我们的拉伸热塑性薄膜产品能为富有想象力的包装设计提供条件，突显产品传达给消费者的信息。

Extruded Solutions has significant operations in Europe, North America, South America and Asia.
ExtrudedSolutions在欧洲、北美、南美和亚洲拥有重要业务。

PVDF works best when extruded relatively slowly at between 10 and 30 mm/s.
当在10至30mm/s之间相对缓慢地挤出时，PVDF效果最佳。

Once extruded into its final form(typically sheet or tubing), Nafion™ is chemically activated by conversion of the salt form to the acid form.
一旦塑成最后的形式（通常层或管），Nafion就与具有了化学活性，能把盐的形式转化为酸的形式。

On the other hand, the material is extruded to facilitate the impact pulverization of the large ball.
另一方面，物料被挤压出来，便于大球冲击。

The armour-shaped extruded inner sheath replaces the cheap wool material, filler or accessory filler.
甲胄式挤压成型的内护套取代廉价的羊毛材料，填充物或附属填充物。

These“holes” exist because an extruded blade does not move air uniformly across the full diameter of the fan.
这些“空洞”的存在是由于挤塑成型叶片不能使空气均衡地通过风扇的整个直径。

In addition, because most of the extruded plates do not have UV protection, their outdoor use life is not the same as the casting plate.
此外，由于大多数挤压板不是抗紫外线，其室外生活与浇注板不一样。

To meet the specific needs of some markets, Sabaf started the production of extruded aluminum taps.
为了满足某些市场的特定需求，萨巴夫开始生产挤制铝阀。