Examples of using Resistor in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
An easy and instant way to do this is to replace the R2 resistor with a potentiometer, and additionally add two diodes in the circuit.
If the resistor sees current continuously for an entire weekend it will become quite hot and could possibly start a fire.
T erminating resistor(Line Terminator), it is a special package resistance or resistance block, used to ensure the stability of the whole circuit signals.
Equipment is now doing more and more small, the trend demands more and more small precision resistor can support more and more high power density.
Fixed chip resistors: This resistor products are widely used in information, communications, consumer electronics and a variety of instruments.
Changes to the pull-up resistor settings on GPIO Port C should ensure that the internal pull-up resistor remains enabled on PC1/TMS;
Resistor arrays are best suited for these applications, and new products such as the LT5400 quad resistor array achieve excellent precision.
After the filter, and just before the output, there is a buffer and a 32 kΩ resistor where further analog filtering can be performed.
The advantage of this type of resistive grouping is that each equivalent resistor still maintains a physical interpretation with its 2D model.
Figure 1: The Ohmite MCS3264R005FEZR is a metal element surface mount 5 milliohm shunt resistor.
Note that the resistor will alter the voltage that gets used as the reference because there is an internal 32K resistor on the AREF pin.
If the signal to be rectified is very small, a pull-down resistor at each op amp output can improve the circuit performance around 0 V.
The total series resistance of the RL circuit will be the inductor resistance plus the 47 Ω external resistor R1.
The electrical device called'Resistor' has property as in case(A).
This resistor could be monitoring a Wi-Fi module, a memory chip, or the microcontroller itself.
To use the AREF pin, resistor BR1 must be desoldered from the PCB.
An easy and instant way to do this is to replace the R2 resistor with a potentiometer, and additionally add two diodes in the circuit.
However, this requires the cost of a large braking resistor power, and the user should comprehensively consider it.
Resistor Values is an electrical engineering program that will calculate the value of a 4 band resistor. .
A carbon composition resistor(also known as a carbon resistor) is a very commonly used resistor. .