Examples of using The compressor in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
Adam Airosto, President of the compressor section for Scandinavia at Atlas Copco, talks about these new water-cooled, oil-free and variable speed-drive compressors. .
First of all, we introduce the compressor air is not in contact with food and beverage category.
Otherwise, higher pressure requirements are eventually placed on the compressor, which results in faster wear of the entire air system.
Because although the surface looks like the color of the compressor oil, the consumption of additives may have exceeded the limit.
The compressor station is one of the most important components of the natural gas transport system.
In accordance with conventional ideas, the compressor and the motor the best efficiency should be about 50% to 90%.
The compressor according to their structure is divided into three categories: open, semi-enclosed, fully enclosed.
(5) The compressor and the turbine are split-type, so that they are each operated at an optimized speed.
The compressor according to their structure is divided into three categories: open, semi-enclosed, fully enclosed.
The compressor converts this gas into a liquid again thereby ensuring the continuation of the cycle.
The compressor station, with magnetic bearings installed in the centrifugal gas compressor, shows overall availability of 98.5% in last five(5) years.
After that, the compressor will enter the normal working state until it reaches the set working pressure, which depends on the user.
In a closed cooling system, the same water continuously circulates between the compressor and some form of external heat exchanger.
Reducing the pressure difference between the low-pressure side(evaporator) and the high-pressure side(condenser) will reduce the energy use in the compressor.
The compressors are driven by quiet-running, energy efficient Kubota engines.
Readings should be taken at various points along the system, including the compressors, aftercoolers, receivers, filters and pneumatic tools.
In 2008, the birth of the compressors H4, H5, H6 and H7 have completed the entire Series H.