Examples of using Digital display in English and their translations into Czech
{-}
-
Colloquial
-
Official
Approx. 2 sec. after releasing the button the digital display(2) switches automatically back to the actual value.
To locate the Digital Display PCB it is necessary to remove the cover that protects the electronic parts of the MobileFeed.
These offer the advantage that the temperatures on the digital display can be directly read
The AS 200 digit cA sieve shaker is recommended whenever controlled amplitude, digital display of vibration height
The continuous gap width setting with digital display ensure optimal size reduction in accordance with the set gap width value.
The digital display of this industrial scale can be mounted to a wall, regardless of the weighing surface,
The characteristic figures at second and third place on the digital display represent the voltage(V)
The internal buzzer sounds and the digital display 3 flashes, of the measured values exceeds the limiting value.
The digital display can be set to the desired channels(1, 2
To ensure that the digital display is as clear as possible, your Mega 1000 has a function that allows
The nominal measurement rate of the BENNING MM 7 is 2 measurements per sec. for the digital display and 12 measurements for the bar graph display. .
the highest temperature that the freezer compartment reaches will flash on the digital display.
The digital display features unique LED indicator embedded in the outer circumference of the scale for quick,
The control panel is equiped with mechanical buttons and digital display of the machine control system.
the measured value is shown on a digital display.
In addition, the 2-color digital display lets you check the sensor's operation status at a glance.
Our weight and tension meters have an accuracy of+/- 0.2%, a digital display and a hand-held radio remote.
Each zone has a Carbolite Gero 3216CC digital PID controller with single ramp to setpoint, digital display and process timer.
By pressing the UP or DOWN key(3)(4) the digital display(2) switches to the setpoint.
The digital display can be switched to channel 1 or 2 by operating the channel selection button 7.