Examples of using Inlet filter in English and their translations into Czech
{-}
-
Colloquial
-
Official
It is necessary to periodically clean the EPA inlet filter and the foam inlet filter to remove small fractions of dust.
The main function of the foam inlet filter(17) is to protect the EPA inlet filter(16) against excessive dirt.
For safety reasons it is unacceptable to install a wet or damaged EPA inlet filter 16.
The main function of the foam inlet filter(15) is to protect HEPA/EPA inlet filter(14) against excessive dirt.
The water inlet filter must be inspected regularly,
Do not use the vacuum cleaner without the EPA inlet filter(16) installed in the CYKLON dust container. If the EPA inlet filter is not there, it is impossible to situate the CYKLON dust container in the vacuum cleaner.
Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods.
d Air filter e Air inlet filter f Duct service opening g Interchangeable plate 5 Installation.
INLET FILTER 1 Release the catch of front cover(10)
INLET FILTER 1 Open the front cover handle 9.
Do not use the vacuum cleaner without the inlet filters and the outer filter installed.
Before turning the vacuum cleaner on, make sure the CYKLON dust container is installed in the chamber of the vacuum cleaner, and also the inlet filters and the outlet filter are installed in the vacuum cleaner.
Clean the pleats of HEPA inlet filter.
Always replace a damaged inlet filter(16) with a brand new.
Place the new filter in the inlet filter casing(20) with the.
The damaged inlet filter should be replaced with a new, genuine manufactured product only.
The main function of the inlet filter is to protect internal components from excessive dirt.
For safety reasons it is unacceptable to install the moist or damaged foam inlet filter 15.