Examples of using Network camera in English and their translations into French
{-}
-
Colloquial
-
Official
The German company MOBOTIX AG is known as the leading pioneer in network camera technology and its decentralized concept has made high-resolution video systems cost-efficient.
Push Button Configuration- You set up a secure wireless connection by pressing the button on the access point or network camera.
it is possible to synchronise the time on the network camera with a time server.
a GND pin, the network camera has 2 pins that can be configured as either input or output.
To access the network camera from the Internet you must configure your broadband router to allow incoming data traffic to the network camera.
Access from the internet once connected, the Network Camera is accessible on your local network LAN.
A VED sensor is a USB camera or network camera connected to the product.
It will turn your device into a network camera that includes cool features like night vision,
The Live View page of the network camera is displayed with links to the setup tools which allow you to customize the camera. .
This Installation Guide provides instructions for installing AXIS P5532-E/P5534-E PTZ Dome Network Camera on your network. .
Check that the configuration of the router settings allows the Megapixel PoE Network Camera to be accessed outside of your local LAN.
The Network Camera system and related service is not a security service.
When you use the Network Camera, please take into account and ensure the privacy
Plug the power in to the Conceptronic Wireless Pan& Tilt Network Camera to start to set.
The network camera must be connected via a network cable for the initial configuration of all WLAN parameters.
The network camera can be used with Windows operating system and browsers.
For example, you can find a printer or a network camera on the local network without knowing the exact IP address of the device you are looking for.
Before using a Network camera, you need to register the camera as shown below.
This means that the DIP switch settings do not need to be changed when using the motor with an Axis network camera with the Pelco-D protocol.
Connect the cable to the Ethernet interface of the PC/ laptop and the network camera.