Examples of using Parameter number in English and their translations into French
{-}
-
Colloquial
-
Official
press DISPLAY again to access the parameter number field, and key in the parameter number followed by ENTER.
buttons simultaneously for 3 seconds, the parameter number will be flashing on the timing-zone
A period mark(.) separates the parameter number in the code from a second number which is used to identify the version number of the method sheet.
scrolls the different installer parameters identified with'P' and by the parameter number, from P01 to P29.
simultaneously for 3 seconds, the parameter number will be flashing on the timing-zone.
The entered program number will be steadily lit on the left side of the copy quantity display and the currently selected parameter number for the program will blink on the right side.
first check the Effect Parameter List(page 39), parameter number 10, to identify the Dry( 50%)/ Wet( 50%); in this case the Dry=Wet value is 64 hexadecimal 40.
lo lo alarm designation n/a 10 relay programmed relay programmed 11 relay activated relay activated 12 auxiliary reading parameter number 13 normal operation.
The list of Read-Only parameter numbers are given below.
To scroll through the parameter numbers quickly, hold down the[%LOAD] or[VOUT] key.
Due to their high resolution, these knobs are suitable for transmitting MIDI Non-Registered Parameter Numbers(NRPNs) as well as standard 7-bit(0-127) MIDI commands.
Press DISPLAY to open the Parameter Number field.
Key in the desired parameter number followed by ENTER.
Refer to parameter number 13 of Features Table Page number 13.
Press[%LOAD] to go to the next parameter number.
Press[VOUT] to go back to the previous parameter number.
Goes to the next parameter number.
Decreases the parameter setting. Goes back to the previous parameter number.
If parameter number level is active: For jumping directly to the operating display r000.
You do not need to key in initial zeros when entering a parameter number.