Examples of using Variable speed control in English and their translations into French
{-}
-
Colloquial
-
Official
The speed of the power tool can be adjusted by toggling the variable speed control on the foot of the drill.
DO NOT attempt to use the variable speed control during starting or during vacuum use.
Adjust the variable speed control according to the material, material thickness
The variable speed control on the front of your sander gives the optimum speed for every material.
The variable speed control allows to set up a optimum oscillating speed based on the accessory
Begin blending by slowly turning the variable speed control to the desired variable speed setting
If the motor shuts off, turn the variable speed control back to the stop symbol(O)
always make sure that the variable speed control is pointed at the stop symbol O.
Adjusting the rotational speed The ON/OFF switch has a variable speed control.
The ON/ OFF switch 6 has a variable speed control device.
The grinder is equipped with a variable speed control knob(A) Fig. 9.
Turn variable speed control switch counterclockwise(as viewed from front of unit) from“OFF” to“HIGH”.
Variable speed control must be used with caution for driving nuts
Simply turn off the variable speed control knob(D) and then turn it on again.
Switch on the machine by gently turning the variable speed control knob(D), clockwise.
Set the reciprocating saw speed by rotating the variable speed control dial(1) to the appropriate speed. .
If the tool has a variable speed control knob(3), set it to the required speed range.
The variable speed control allows you to adapt the speed of the tool to the workpiece material.
The more the variable speed control trigger is pulled,