Examples of using Mass flow in English and their translations into Greek
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Official/political
-
Computer
Mass flow usr. gases maximum power.
Library management, open mass flow control, asset management,
The polymer melt flow rate meter is applicable to the determination of mass flow rate and melt volume flow rate of thermoplastic melt in GB/ t3682-2000 national standard.
When the pump's mass flow drops to the same level as the mass flows into the chamber,
Mass flow controller with range of 0 g/s-7 g/s, reading accuracy not less than 1.5%,
The four components of the steam power plant involve mass flow in and out, and therefore they should be treated as open systems.
The tungsten mass flow determines the amount of H2O liberated during the entire reduction process.
In 1982, Bosch introduced a sensor that directly measures the air mass flow into the engine, on their L-Jetronic system.
where the mass flow of the sum of the compounds causing the labelling R40 is greater than,
rotary motion, mass flow, and the earth's magnetic field,
Based on this concept, mass flow can be measured with low pressure drop,
For discharges of the VOCs referred to in paragraph 6, where the mass flow of the sum of the compounds causing the labelling referred to in that paragraph is greater than, or equal to, 10 g/h, an emission limit value of 2 mg/Nm³ shall be complied with.
color, mass flow, The publication of the technical specifications is done in cooperation with the Technical University of Athens
The modal weighting factors specified in the test cycle procedure shall be taken into account by taking a sample proportional to the exhaust mass flow during each individual mode of the cycle.
The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion.
The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion(see stoichiometry).
is created and the energy required to maintain the ΔT is dependent on the mass flow rate.
measuring relative mass flow rates of liquid media in the range from 0.03 to 3 m/s(0.1 to 9.84 ft/s).
measuring relative mass flow rates of liquid media in the range from 0.03 to 3 m/s(0.1 to 9.84 ft/s).
For instance, mass flow meters at oil terminals would ensure the right quantities of fuels are transferred between buyers