Examples of using Starting current in English and their translations into Greek
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Official/political
-
Computer
In large electromagnets, the starting current can be more than 10 times the holding current. .
With this method, the starting current will be reduced in 1/3 of the rated current
The current at the maximum stroke is called the starting current, while the current at the moment of absorption is called the holding current,
Starting current and cooling circuit design provides for 55-75 A(starting, per phase), 13-16 HP/10-12 kW loads.
As you know, when starting, the starting current can reach up to ten times nominal(usually five
when switching on the required working equipment, the starting current exceeds the trigger factor of the 10 A fuse.
When the line fault current reaches the protection setting(starting current), the current protection device acts immediately.
The specific converters manage to successfully combine the highest performance with the ability to support loads without problems with high starting current.
If the moving iron core is stuck and the starting current continues to flow,
Question: If I'm trying to control the speed of a motor rated at 2amps do you think the 5A Variac will be over rated enough for the starting current?
Overcurrent protection: refers to a protection device whose starting current is set according to the maximum load current. .
has a larger starting torque and a smaller starting current and delivers constant output power at high(50-100Hz).
Refrigeration introduced on the Genova Boat Show the revolutionary Mini Air-Condition Compact 3.5 of the successful series Climma Compact Quattro with Rotary compressor 220V 50Hz high performance with really low starting current and operating current. .
the soft start with starting current limitation prevents excessive acceleration during switch-on
monitoring starting current, monitoring the power parameters
the design of which provides for the restriction index starting current.
average starting torque in multiples of 0.348, the average starting current lower 18.1A.
high power motor and the starting current is a little large, 6V starting flow is around 3A, 12V starting current is about 6A, the starting current will return to normal 1-2A when starting, so you need select high power supply,
Car Jump Start Current.
TEM Start Current: 5.3amps.