Examples of using Sanded in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
drill, sanded, polished and machined.
carefully sanded with sandpaper cutting place and the cover.
This may result in a floor that has to get replaced or sanded down to bring back its level surface area.
it should be cleaned of bark, sanded, remove knots and treated with an antiseptic.
This is one of the reasons why leaving cedar furniture in a sanded unfinished state is by far the most popular finish.
Also most of these lifetime finishes can not be fixed or sanded because of a micro bevel placed on the edge of prefinished floor.
the stones were placed, the Incas sanded the knobs away,
This is one of the reasons why leaving cedar furniture in a sanded unfinished state is by far the most popular finish.
Because one of the keys to the success of the finishing process is that the media is sanded properly and correctly
Errazuriz twisted and sanded the wood, then lacquered it black
then you have long and carefully sanded box c on both sides,
style of rubies and squares would certainly function best on a newly sanded raw wood floor, yet it may be beautifully used on a varnished wood floor.
which depends on things like why the floor is sanded(are any deep scratches being sanded out etc) and above all on the depth of the wood above the tongue and groove workings.
see them being serviced, watered, sanded, and fueled.
elegant features such as antiquated yet contemporary brass flip up handles and sanded edges which subtly reveal the warm waxed wood underneath.
drilled, or sanded because through such process the asbestos fibres can get disintegrated and inhaled.
We cut available small pieces from sanded panel, then glue in laminated panel in well matched rank,
mahogany are clearly visible when sanded, this does not apply to this wood,
more Cured material is then cut in sheets or shapes and sanded on one or both sides depending the brand used Sometimes the material is….
sanded out, if not too bad, but the flip side of this, is that the floors could"crown" at a later stage, due to the boards being thinner at the edges compared to the middle, which is the lowest part of the bow and">in turn doesn't get sanded as much.