Examples of using Input signal in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
The input signal has been amplified by the magnification of[THR GAIN] which is displayed on the COND MONI menu screen and outputted.
If you still don't get an input signal, there may be an issue with the configuration of your audio interface.
The input signal is a full-scale 1kHz sine wave sampled at 48kHz.
On the other hand, the input signal is chopped twice by CHOPIN and CHOPOUT.
The input signal is sampled with the falling edge of CS, and SCLK is used for conversion and serial data output.
Controlling the filter update rate and phase with respect to the input signal is much more important than the decimation rate.
No input signal is necessary; the input stimulus consists of moving the DUT between its various modes of operation and non-operation.
The Tracing Model section adds even harmonic distortion to the input signal.
To increase the input signal, you can connect the guitar to a preamplifier and connect the preamplifier to your computer.
In this case, the input signal is attenuated, amplified, and level shifted to provide a single-ended input to the ADC.
General Predistorter Theory Given a sinusoidal RF input signal, the amplifier compression distortion at the RF frequencies typically looks like Figure 1.
The user interface is dominated by a spectrograph which allows you to isolate and freeze specific shreds of the input signal.
If input signal is valid and gen-locked, IS-miniX will output the still image in the same format of the input. .
The ADC then generates a code representing the relationship between an input signal and that reference voltage.
This node calculates and outputs the correlation matrix between channels for each frequency bin from the complex spectrum of an input signal.
Press soft key 4(Ref Line) to set the reference line level that is used to normalize the input signal.
In either case, the input signal is defined as VIP- VIN.
At Resonance values above 100%, the filter will continue to ring indefinitely even after the input signal has been stopped.
These delays can arise from the time taken by devices to process an input signal and output a result.
In addition to the standard features, the dual output model can convert independently one input signal to two separate outputs at different resolutions.