Examples of using Maximum current in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
There channels for RGB output, each allows a maximum current of 4A.
What's more, Non-channel handle support the maximum current 130 A.
The sense resistor is, therefore, chosen to ensure that the voltage drop across it is between 50mV and 150mV at maximum current.
Also, T2's maximum current capability(2mA at VBDR 4.0V) determines the maximum bridge-voltage modulation allowable.
Calculation of the maximum current of the inductor Next, the maximum current of the inductor is calculated according to the following equation.
A multi-turn potentiometer is used to configure the valve parameters such as the base and maximum current, dither and ramps.
Peak current: The maximum current that a power supply can provide for brief periods.
The utility contains an updated database of components, uses methods of protection against overheating and exceeding the maximum current characteristics.
All line cords, circuit breakers, connectors and electrical services must be rated for the maximum current drawn.
A prototype board with two MAX8686 PWM controllers and a coupled choke can deliver a maximum current of 50A at an output voltage of 1.2V.
The regulation voltage, VFB, is stable at around 100mV and controls the maximum current that is driven through the WLEDs.
The value of the upper resistor(R1 and R5) establishes a maximum current value.
The basic parameters of field programmable: Maximum speed, minimum speed, maximum power, maximum current, resonance avoid.
The maximum current is simply 0.75A, with a 5200mAh power bank;
The maximum torque for a motor will depend on the maximum current although this will usually be only usable until thermal considerations take precedence.
Basic current of 5 Amp while retaining a maximum current of 80 Amp and extended functional features.
Q: single tantalum capacitor can provide the maximum current is how much?
Maximum current is 32A/phase(Max 192A in parallel six phase), 13 channel low-level signal output.
The solution employed by the company was to reduce the maximum current.
Inductance decreases by the change in slope, maximum current increases by the change in slope, and the saturation B-field remains the same.