Examples of using Maximum flow in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
As the pump starts, the ball moves out totally from the flow path when the pumping is on giving a full bore maximum flow/discharge with minimum head losses.(Fig. A).
Adjusting the pressure relief valve 2 slowly turn the regulation know, increasing the pressure p5a slowly and the flow qv7 increases to the maximum flow.
Forklift Truck: Normally, the forklift can supply sufficient flow to operate and attachment, please do not attempt to exceed the maximum flow and pressure.
In the same way as last year, the fuel restrictor specification was set to a maximum instantaneous flow of 90 kg/h. The overtake system was increased to a maximum flow of 100 kg/h and was limited to 5 uses during the race.
Jiu Xiang is the most famous attractions in the underground waterfall- male and female pairs of waterfall with a maximum flow of 320 cubic meters per second.
Rexroth 4WREE Series Proportional Directional Valves Size 6, 10 Component series 2X Maximum operating pressure 315 bar Maximum flow 180 l/min Features- Actuation is by proportional solenoids with central….
The reason for this is that the maximum flow problem and the minimum cut problem are two sides of the same coin due to the maximum flow minimum cut theorem, and thereby modeling using flows possesses a rich representation in many practical applications.
Efficiency drops dramatically when a pump isn't running at its designed maximum flow, but by altering the amount of power being supplied to the motor, you can compensate for this and still achieve high efficiency.
750bar, maximum flow rate:… Original.
F(Value of maximum flow).
The maximum flow problem and the minimum cost flow problem.
This machine has five plungers with the maximum flow reaching 30000L/H.
Hf: Suction pipe line loss(Value at maximum flow of corresponding pipeline);
So what is the maximum flow from S to T in the grid?
Center filling valves used which are maximum flow rate and minimum bottle distortion during HOT filling.
EXMIRE technique to bend pipes with flat surface below 10% will ensure the maximum flow of liquid.
After checking the standard flow quantity level of the product details and a maximum flow quantity level, please choose a model.
There is a long history of algorithms for solving the maximum flow problem, with the first algorithm due to Ford and Fulkerson.