Examples of using Shorted in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
The device also includes a fault flag( active-low FLT) that indicates open string, shorted string, and thermal shutdown.
Speculators who shorted airline stocks before 9-11 have been identified as Israelis apparently.
This then became Anglicised and shorted to‘Alcatraz'.
With the inputs shorted, the system can be tested in a high-gain dc mode see Figure 6.
Shorted heater protection apposition wiring between heater and thermocouple Electronic protection against neutral malfunction.
The ring of the Yser also dramatically shorted the Belgian Army's area of operations.
The fail-safe feature sets the output high when the inputs are undriven and open, terminated, or shorted.
Mask the active-low LOAD_ bits to the active-low CL0 output by setting the MAP. LCTM(tweeter and shorted load mask) bit to 1 when the tweeter detection diagnostic is no longer running.
Loss of Ground When loss of ground occurs(for example, due to a bad solder joint), it can happen with one or more of the external switches open or shorted to either battery or chassis ground.
In comparing open and shorted loops, the greatest difference will be the feed impedance since the termination is starting from opposite ends of the Smith chart Figure 12.
The first step in finding suitable pairs is to look for securities that have something in common, and that trade with good liquidity and can be shorted.
It includes an open-drain fault flag(FLTB) that goes low in case of an open string, shorted string, or overvoltage activation in any one of the channels, or also in thermal shutdown.
A versatile antenna is a loop that does not end with a short to ground, but instead ends with a pad/connection that can be opened or shorted to ground.
Shorted wooden handle Contour Blush Brush with 31mm brown nylon hair Feature of Contour Blush Brush Top nylon hair, easy to catch powder, no irritate to your skin.
I measured the residual noise with a dummy load of 100k ohm and inputs shorted to the ground the conditions were a little different from the industrial standard.
To accommodate the growing demand for in-car electronics, the complexity of automotive wiring harnesses continues to grow, increasing the need to detect broken or shorted wires quickly and easily.
Honestly, I need to deal with our liquor distributor who shorted me on yesterday's delivery, and one of my bartenders called in sick, so.
The device operates from a +3.0V to +5.5V supply and features true fail-safe circuitry, guaranteeing a logic-high receiver output when the receiver inputs are open or shorted.
Though not a precise current source, it has adequate current control for the purpose and is able to maintain current control even into a shorted cell.
Possibly shorted out everything?