Examples of using Load current in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Automatic detection the direction of the flow of load current. And instructions by one LED.
FZN12A-12D type pneumatic type load break switch can open and close load current and overload current. .
Two LED instructions signal of energy impulse(red) and direction of the flow of load current(yellow).
Rload, where Iload equals the load current and Rload equals the load resistance.
Automatic detection the direction of the flow of load current. And Instructions on individual LED.
the inductor current(blue), and load current(pink).
For these reasons, in applications where the load current changes suddenly, the transient response characteristics are of vital importance.
Interruption Power interruptions present a complete loss of supply voltage or load current.
Sanitary Ware Whisk Use 6V/ 9V /12V DC Gear Reduction Motor 322mA Rated Load Current.
Providing better efficiency with over 1MHz switching frequency, increased maximum load current, and greater power density, the Gen III DrMOS series achieves efficiency standards targets while providing up to 60A per phase in a 6x6mm2 PQFN package.
Tungsten copper contact for high-voltage breaker is also called as high-voltage switch, which not only plays an important role in cutting or closing high-voltage circuit in the no-load current and load current, but also in protecting relay when short circuit.
However, given the fact that the inductor current is greater than the load current, the difference flows into the output capacitor, causing the output voltage to continue to rise.
In addition, as the load current increase, the voltage declines,
At this time, although the on-time becomes short to some extent, because the load current continues to diminish, at this time the power supply ends
So the system not only ensure each UPS located in general UPS power supply can share load current, but also it can reduce the circulation maybe happened in parallel system to zero.
Imagine a situation where the load current, 3A in magnitude, virtually ceases to flow due to the CPU, for example, or something else shutting down.
the measured current can be selectively added to the charging current, battery current or load current as desired.
can save more oil with low-energy, which can protect electric circuit of vehicle, not be damaged easily by over-high load current.
where Iload equals the load current and Rload equals the load resistance.
where Iload equals the load current and Rload equals the load resistance.