CONTROL VALVE in Malay translation

• injap kawalan

Examples of using Control valve in English and their translations into Malay

DH220-5 relief valve, main control valve for Doosan excavator hydraulic control,
injap pelega DH220-5, injap kawalan utama untuk kawalan hidraulik Doosan penggali,

the stress condition is good, the reciprocating movement of the cylinder adopts advanced built-in control valve, bidirectional drive,
keadaan tegasan adalah baik, pergerakan balas silinder menggunakan injap kawalan terbina dalam, pemanduan dua arah,

Two-way hydraulic flow control valve, referred to as two-way flow valve,
Injap kawalan aliran hidraulik dua hala, yang disebut sebagai injap aliran dua hala,

Solenoid operated control valve manufactured by Finotek is strictly manufacturing all the key parts of the valve, especially tests the valve
Solenoid dikendalikan injap kawalan yang dikeluarkan oleh Finotek adalah dilarang sama mengeluarkan semua bahagian utama injap,

received the switching single from electric control box controlled by a pressure control valve in order to control the grease solenoid directional DF,
menerima tunggal pensuisan dari kotak kawalan elektrik dikawal oleh injap kawalan tekanan untuk mengawal gris solenoid arah DF,

flow control valve, proportional control valve, the formation of an independent system.
aliran injap kawalan, injap kawalan berkadar, pembentukan sistem yang bebas.

the directional control valves and hydraulic pressure valves is used as the main hydraulic fluid control valve.
injap kawalan berarah dan injap tekanan hidraulik digunakan sebagai hidraulik injap kawalan cecair utama.

Electric Controlled Valve.
Injap Kawalan Elektrik.

A controlling valve that opens and close according to electric signal.
Injap kawalan yang membuka dan menutup mengikut isyarat elektrik.

Filter Control Valves.
Penapis kawalan injap.

China Filter Control Valves Brass Filter Control Valves..
China Penapis kawalan injap Injap kawalan penapis tembaga.

GE-Aquamatic Pneumatic Control Valves.
Ge- aquamatic pneumatik kawalan injap.

Subject:Solenoid Controlled Valve, 1-1/2", 3-Ways.
Subjek: injap terkawal solenoid, 1- 1/ 2", 3- cara.

Laterals control valves 4"- 8" thread For pressure water tank.
Katup kontrol laterals 4"- 8" utas Untuk tangki air tekanan.

Subject:Manual Controling Valve, 2"BSP/NPT.
Subjek: injap mengendalikan manual, 2" bsp/ npt.

Manual Controling Valve.
Injap mengendalikan manual.

Width water passageways designed for short reaction of controlling valve and anti-clogging.
Lebar laluan lorong yang direka untuk tindak balas pendek mengawal injap dan anti-tersumbat.

This Solenoid Controlled Valve with 3-ways CHINADRIP Plus Solenoid, is a hydraulically operated, diaphragm actuated control valve with internal hydraulic Feed& Bleed control loop.
Injap Kawalan Solenoid ini dengan 3 cara CHINADRIP Plus Solenoid, adalah injap kawalan diafragma yang dikendalikan secara hidraulik, dengan injap hidraulik dalaman& amp; Gelung kawalan terdedah.

Directional control valves can be found in hydraulic system of industrial machinery
Injap kawalan berarah boleh didapati dalam sistem hidraulik jentera perindustrian

Flow control valves usually are used to limit the pressure for hydraulic devices,
Injap kawalan aliran biasanya digunakan untuk menghadkan tekanan untuk peranti hidraulik,