Examples of using Heating temperature in English and their translations into Polish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Financial
-
Official/political
-
Programming
-
Computer
The oil pan device uses a heating temperature control system, according to changes in ambient temperature automatically adjust the temperature of crude oil in order to achieve the effect of rapid fine filter,
The oil pan device uses a heating temperature control system, according to changes in ambient temperature automatically adjust the temperature of crude oil in order to achieve the effect of rapid fine filter, so as to ensure that the various Climate conditions
Therefore, the heat treatment of only one type of fastener is sufficient as long as the heating temperature, the holding time,
The economic effect is achieved due to the specific properties of wood for a long time to maintain the resultant under heating temperature and the presence of the upper well-equipped space,
When the heating temperature is low,
the deformation resistance is low, but the heating temperature is high,
like the curing time, and the heating temperature, different products need different curing time and temperature. .
cooling press time and heating temperature, etc at PLC. It's easy to operate.
the macroscopic stress after heating temperature although most can be removed, and the microscopic residual stress remains.
use touch button digitalmethod to set the speed of agitator, heating temperature and timing, etc.
Therefore, the selection of TA7 thick slab heating temperature is more favorable for deformation in the 卩 phase region,
In hot processing, the heating temperature is 980℃ to 1020℃. It is observed that the original beta grain boundary is very obvious in the microstructure obtained by hot deformation with a deformation rate of 95%,
The heating temperature is low,
Because the titanium plate rolling with low heating temperature, soft, surface quality requirements,
when a two-phase titanium alloy is heated below the transformation point, as the heating temperature increases, the primary a isoaxes in the structure gradually transition to the β phase,
when the two-phase titanium alloy is heated below the phase transition point, as the heating temperature increases, the primary a equiaxion in the microstructure gradually changes to the β phase,
it is necessary to machine running speed, heating temperature, air flow,
curing at room temperature or heating temperature is carried out;
When the heating temperature is below 500 °C, oxygen and titanium will form a dense oxide film of TiO2, which has a certain protective effect on the surface of titanium; When the heating temperature reaches 600 °C-700 °C, the oxide film
Heating temperatures up to 95 °C can be achieved and the highest temperature stability is provided.