Examples of using Heating temperature in English and their translations into Romanian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
Heating temperature up to 99℃ for water bath
The forging and stamping heating temperature range is between 850 and 1150 °C. Alloy BT;
Angled electric fireplaces allow also to adjust not only the heating temperature, on and the game of flame.
Digital display of both rotation speed and heating temperature allows for optimal control of all distillation processes.
In order to eliminate the internal stress of the workpiece more thoroughly, the heating temperature should be controlled.
Product Description Our graphene electrothermal film product itself has the limit temperature characteristics when heating temperature reached ideal product itself automatically adjust the power of energy saving mode thus to save electricity and….
knowing that hot water will not be needed for a while, reduce the heating temperature to a minimum or turn off the water heater completely.
Starch gelatinization can occur because of water heating temperature, weather, water amount
When the heating temperature is below 500 °C, oxygen
The heating temperature is monitored by the room controller,
When the heating temperature is low,
titanium alloy rods is the billet heating temperature which determines the state of metal phase transformation.
Therefore, the heat treatment of only one type of fastener is sufficient as long as the heating temperature, the holding time,
Therefore, the heat treatment of only one type of fastener is sufficient as long as the heating temperature, the holding time,
In the different area of the site can meet the requirements of different heating power and heating temperature requirements, according to the design requirements,
use touch button digital method to set the speed of agitator, heating temperature and timing, etc.
use touch button digital method to set the speed of agitator, heating temperature and timing, etc.
when a two-phase titanium alloy is heated below the transformation point, as the heating temperature increases, the primary a isoaxes in the structure gradually transition to the β phase,
That is to say, when the two-phase titanium alloy is heated below the phase transition point, as the heating temperature increases, the primary a equiaxion in the microstructure gradually changes to the β phase,
the deformation resistance is low, but the heating temperature is high,