Examples of using On a flat surface in English and their translations into Slovak
{-}
-
Medicine
-
Colloquial
-
Official
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
rest the vial on a flat surface.
the fabric acquired for upholstery is placed on a flat surface, which is located inside out.
Lay the infant on the back on a flat surface, such as a tabletop or the floor.
place the syringe with the needle on a flat surface.
Boards should be laid on a flat surface in the form of a shield,
but doing it on a flat surface, is much easier.
The workpiece must be spread out on a flat surface with the back side facing you.
Place the charging base station against a wall, on a flat surface and where the robot vacuum cleaner can easily find it.
The space is completely closed, only a cookie lying on a flat surface creates a picture in the picture.
Reinforced rubber protection corners technology Ballistic Corners On the Table Lay technology protects the screen when laying the display face down on a flat surface.
The detector can be installed either directly on a flat surface or using a dedicated bracket that allows installation of the device at a constant angle of 90°.
It should be installed on a flat surface and it is desirable to exclude its neighborhood with heating appliances,
Then put on a flat surface and grease with glue water(a glass of water 2 tablespoons of PVA).
Perfect impact protection thanks to a layer of silicone reinforced rubber protection corners technology Ballistic Corners Protection display technologies Lay On Table at laying down the display on a flat surface.
He worked on the problem of empty and filled spaces on a flat surface as well as the stereoscopic view.
It's simple, just put the tool on a flat surface, put the sheet to garnish
Can be installed directly on a flat surface or with the use of dedicated brackets from BRACKET C set.
that it was hard to believe that they are drawn on a flat surface.
If such a structure is installed on a flat surface, then the name for it is rockeries.
The material should be laid out on a flat surface inside out and marked up with soap