Examples of using PHASE switch in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Adjusting the Phase Position with the Phase Switch.
Variable low pass filter control and phase switch.
Artistic view of the phase switches module.
If your subwoofer has a phase switch, adjust the subwoofer to provide the highest frequency setting possible.
Flip the phase switch to the opposite position;
The phase switch lets you invert the phase of the signal played through your powered subwoofer.
Always try the phase switch to establish the best setting before fine-tuning the crossover frequencies.
The Phase switch matches the PL 118 Sub A's phase position to that of connected mid/ high units 0 /180.
PHASE SWITCH- Depressing this switch reverses the polarity of the subwoofer's output signal.
A phase switch is located on the side of the circuit board inside the guitar accessible through the soundhole.
If your subwoofer is located anywhere else then try the phase switch in both positions and set it to the position that produces the strongest bass at your listening position.
The best way to set the Phase switch is to listen to music that you know well
Input Metering and Phase switch.
starting in Cycle 5 with the implementation of 90 phase switching.
The PHASE switch Item 9 in Figure 1.
Setting of the PHASE switch is not proper.
OUT jack cannot be changed by the OUTPUT LEVEL/ PHASE switch 7.
OUT jack(10), if the OUTPUT LEVEL/PHASE switch(7) is set to“0” in the right or left position.
The optimum settings of the PHASE switch and the LOW-PASS filter frequency are inter-related and also dependent on
Tone controls with push/pull function for phase switch and pure bypass.