Examples of using Machine back in English and their translations into Spanish
{-}
-
Colloquial
-
Official
FOR SAFETY: Before tipping machine back, unplug power cord from wall outlet.
Tilt the machine back so that the sandpaper disc does not touch the floor See(1) in Figure 7.
again to bring the machine back to its standard operation mode.
Tilt the machine back so that the sanding pad does not contact the floor.
That you went out to Istanbul and brought her and the machine back to England.
Tip machine back on wheels and push machine forward to begin next path.
Tip the machine back to the rear tilt wheels(1)
Tilt the machine back on it's rear wheels
Tilt the machine back and push it forward to start a new backward cleaning pass.
Tilt entire machine back on handle, remove the ten screws
recovery tank before tipping the machine back to install or change a brush,
Tilt the machine back as you would to change the pad
FLX/ 18ST models- Tip the machine back to lift the vacuum shoe off of the fl oor,
Tilt machine back and push it forward to start a new backward cleaning pass ILLUS.8.
Turn the machine back on, and the machine will automatically find a needle position.
This will bring your machine back to the state it was in before a recent application was installed.
Tilt the machine back and clean the underside of the scrub head Figure 31.
I could dial the machine back-- no,
Tilt the machine back as you would to change the.
to the first truck, and transfers the machine back.