Examples of using Manometer in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Here: protected pressure gauges and special manometer glass.
OEM service for biogas manometer plant with electric generator.
For an overview of all available Manometer accessories at K.H.
High quality international brand Exact liquid filled manometer.
Both measuring points are connected to the tube manometer in HM 220.
If the manometer reading is higher than 0.6 inches of water column,
Air Control: manometer that shows the tank pressure,
The manometer port permits temporary installation of a manometer to ensure that the engine receives the correct fuel pressure to operate efficiently throughout its operating range.
This can be measured with the dryer running with a manometer at the point where the exhaust duct connects to the dryer.
Static pressure in the exhaust duct can be measured with a manometer, placed on the exhaust duct approximately 2 ft.(60.9 cm)
moisture filter, manometer and a manometer pressure regulator.
Wait until the initial heating phase has been completed, i.e. when the required operating pressure(approx. 1.2 bar) is indicated on the manometer 78.
check the system for leaks with a manometer.
Note that these values are measured with the dryer running with a manometer presented to the exhaust duct that connects to the dryer.
2 measuring point for static pressure, 3 inclined tube manometer from HM 170 displays the dynamic pressure.
N Pressurize the tank- move the unlocked pump handle(1) up and down several times until piston manometer(2) shows a pressure of 2 bar 29 PSI.
The working pressure can be adjusted by a pressure regulator that is protected against inadvertent adjustment and can be monitored with the working-pressure manometer.
The 1 Channel PHENIX Digital manometer is a device compatible with all our devices in the wireless and portable ranges.
For calibration, Dedienne Aerospace has the internal capability to perform manometer, dynamometer calibration and complex 3D measurements in accordance with international standard ISO 17025 on every location.
Tighten supplied manometer with the screw nuts from beneath onto the membrane plate in the front right corner.